Dukane 8111H user manual Communication setup, Operating Guide, Condition

Page 50

3. Network Functions

3.8.2 Communication setup

To configure the setup of the communication using NETWORK BRIDGE for the projector, use items in the COMMUNICATION menu. Open the menu of the projector and select the OPTION - SERVICE - COMMUNICATION menu. (OPTION menu - SERVICE – COMMUNICATION in the User's Manual -

Operating Guide)

1)Using the COMMUNICATION TYPE menu, select the NETWORK BRIDGE for the CONTROL port.

2)Using the SERIAL SETTINGS menu, select the proper baud rate and parity for the CONTROL port, according to the specification of the RS-232C port of the connected device.

Item	Condition

BAUD RATE	4800bps/9600bps/19200bps/38400bps
PARITY	NONE/ODD/EVEN
Data length	8 bit (fixed)
Start bit	1 bit (fixed)
Stop bit	1 bit (fixed)

3)Using the TRANSMISSION METHOD menu, set up the proper method for the CONTROL port according to your use.

NOTE • The OFF is selected for the COMMUNICATION TYPE as the default setting.

•Using the COMMUNICATION menu, set up the communication. Remember that an unsuitable setup could cause malfunction of communication.

•When COMMUNICATION TYPE is set to NETWORK BRIDGE, the CONTROL port doesn't accept RS-232C commands.

3.8.3 Communication port

For the NETWORK BRIDGE function, send the data from the computer to the projector with using the Network Bridge Port that is configured in the “Port Settings” of web browser. (18)

NOTE • Except for 9715, 9716, 9719, 4352 between 1024 and 65535 can be set up as the Network Bridge Port number. It is set to 9717 as the default setting.

50

Image 50

Contents MY Image Still Image Transfer Display Thank you for purchasing this projectorWeb control Messenger FunctionConfiguring and controlling the projector via a web browser Content Main functionsEquipment connection and network setting Network FunctionsConfiguring and controlling via a web browser MY Image Still image Transfer DisplayMessenger Function Setup menu in the User’s Manual Operating Guide Required equipment preparationEquipments connection Manual network connection settingNetwork settings Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for computerFor example About IP address Setting manuallySetting automatically Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionCommand Control via the Network Configuring and Controlling the Projector via a Web BrowserProjector Management using Snmp Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password LogonOnly displayed when logged on using an Administrator ID Projector Name Displays the projector name settingsDisplays the Dhcp configuration settings Network InformationDisplays and configures network settings Port Settings Displays and configures communication port settingsClick Apply button to save the settings Send mail Mail SettingsDisplays and configures e-mail addressing settings Smtp Server AddressAuthentication Failure Alert SettingsDisplays and configures failure & alert settings Cold StartAlert Items are shown below Schedule Settings Displays and configures schedule settingsDescription Schedule Date Month/DayFirst, 2, 3, 4, Last Date/Time SettingsDisplays and configures the date and time settings Time difference CycleSecurity Settings Up to 64 alphanumeric characters Configures the community name if Snmp is usedCommunity name Projector Control Adjusts the vertical picture position Adjusts the horizontal picture positionHdmi Detected Projector Status Displays the current projector statusRestarts the projector’s network connection When Logoff is clicked, the Logon menu is displayed. 14Network Restart LogoffMail Settings 19 Mail AlertsMail Alerts Projector Management using Snmp Snmp Settings 17Event Scheduling Schedule Settings 22 Event SchedulingDate/Time Settings 24 Manual conciseStill Image Transfer MY Image Still Image Transfer Display Network Restart on the main menuMessenger Function Messenger Function Communication Port Command Control via the NetworkFollowing two ports are assigned for the command control Command Control via the Network Header Data length RS-232C command Check Sum Connection Command FormatReply Error code TCP #9715Reply Data format Authentication Automatic Connection BreakConnecting devices LAN port Control portCondition Communication setupOperating Guide Transmission method HALF-DUPLEXHALF-DUPLEX FULL-DUPLEXDukane Corp AV Service Dept