Dukane 8111H user manual Time difference, Cycle

Page 25

3. Network Functions

3.1 Configuring and controlling the projector via a web browser (continued)

		Item	Description

	Time difference		Configures the time difference. Set the same time difference
	Time difference		as the one set on your computer. If unsure, consult your IT
			manager.
	SNTP		Click the [ON] check box to retrieve Date and Time information
	SNTP		from the SNTP server and set the following items.
			from the SNTP server and set the following items.
			Configures the SNTP server address in IP format.
			• The address allows not only IP address but also domain
		SNTP Server Address	name if the valid DNS server is setup in the Network Settings.
			The maximum length of host or domain name is up to 255
			characters.
		Cycle	Configures the interval at which to retrieve Date and Time
		Cycle	information from the SNTP server (hour:minute).
			information from the SNTP server (hour:minute).

Click [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

•To enable the SNTP function, the time difference must be set.

•The projector will retrieve Date and Time information from the time server and override time settings when SNTP is enabled.

•The internal clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time.

25

Image 25

Contents Web control Thank you for purchasing this projectorMY Image Still Image Transfer Display Messenger FunctionEquipment connection and network setting Content Main functionsConfiguring and controlling the projector via a web browser Network FunctionsMY Image Still image Transfer Display Configuring and controlling via a web browserMessenger Function Required equipment preparation Setup menu in the User’s Manual Operating GuideNetwork settings Manual network connection settingEquipments connection Open Network Connections. .2.2.bSet IP address, subnet mask and default gateway for computer Manual network connection settingSetting automatically About IP address Setting manuallyFor example Click Internet Option settingCheck connection 3.c Local Area Network LAN Settings windowProjector Management using Snmp Configuring and Controlling the Projector via a Web BrowserCommand Control via the Network Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Logon PasswordDisplays the Dhcp configuration settings Projector Name Displays the projector name settingsOnly displayed when logged on using an Administrator ID Network InformationDisplays and configures network settings Displays and configures communication port settings Port SettingsClick Apply button to save the settings Displays and configures e-mail addressing settings Mail SettingsSend mail Smtp Server AddressDisplays and configures failure & alert settings Alert SettingsAuthentication Failure Cold StartAlert Items are shown below Displays and configures schedule settings Schedule SettingsDate Month/Day Description ScheduleDisplays and configures the date and time settings Date/Time SettingsFirst, 2, 3, 4, Last Cycle Time differenceSecurity Settings Community name Configures the community name if Snmp is usedUp to 64 alphanumeric characters Projector Control Adjusts the horizontal picture position Adjusts the vertical picture positionHdmi Detected Displays the current projector status Projector StatusNetwork Restart When Logoff is clicked, the Logon menu is displayed. 14Restarts the projector’s network connection LogoffMail Alerts Mail Settings 19Mail Alerts Snmp Settings 17 Projector Management using SnmpEvent Scheduling Event Scheduling Schedule Settings 22Manual concise Date/Time Settings 24Still Image Transfer Network Restart on the main menu MY Image Still Image Transfer DisplayMessenger Function Messenger Function Following two ports are assigned for the command control Command Control via the NetworkCommunication Port Command Control via the Network Reply Error code Command FormatHeader Data length RS-232C command Check Sum Connection TCP #9715Reply Data format Automatic Connection Break AuthenticationLAN port Control port Connecting devicesOperating Guide Communication setupCondition HALF-DUPLEX Transmission methodFULL-DUPLEX HALF-DUPLEXDukane Corp AV Service Dept