Dukane 8111H user manual Event Scheduling, Schedule Settings 22

Page 38

3.Network Functions

3.4Event Scheduling (continued)

Schedule Settings (22)

Schedule settings can be configured from a web browser. Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser.

2)Enter the Administrator ID and password and click [Logon].

3)Click [Schedule Settings] on the main menu and select the required schedule item. For example, if you want to perform the command every Sunday, please select [Sunday].

4)Click [Enable] check box to enable scheduling.

5)Enter the date (month/day) for specific date scheduling.

6)Click [Apply] button to save the settings.

7)After configure the time, command and parameters, click [Register] to add the new event.

8)Click [Delete] button when you want to delete a schedule.

There are three types of scheduling.

1)Daily: Perform the specified operation at a specified time every day.

2)Sunday ~ Saturday: Perform the specified operation at the specified time on a specified day of the week.

3)Specific date: Perform the specified operation on the specified date and time.

NOTE • In Standby mode the power indicator will flash green for approx. 3 seconds when at least 1 “Power ON” schedule is saved.

•When the schedule function is used, the power cord must be connected to the projector and the outlet. The schedule function does not work when the breaker in a room is tripped. The power indicator lights orange or green when the projector is receiving AC power.

38

Image 38

Contents MY Image Still Image Transfer Display Thank you for purchasing this projectorWeb control Messenger FunctionConfiguring and controlling the projector via a web browser Content Main functionsEquipment connection and network setting Network FunctionsConfiguring and controlling via a web browser MY Image Still image Transfer DisplayMessenger Function Setup menu in the User’s Manual Operating Guide Required equipment preparationEquipments connection Manual network connection settingNetwork settings Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for computerFor example About IP address Setting manuallySetting automatically Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionCommand Control via the Network Configuring and Controlling the Projector via a Web BrowserProjector Management using Snmp Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password LogonOnly displayed when logged on using an Administrator ID Projector Name Displays the projector name settingsDisplays the Dhcp configuration settings Network InformationDisplays and configures network settings Port Settings Displays and configures communication port settingsClick Apply button to save the settings Send mail Mail SettingsDisplays and configures e-mail addressing settings Smtp Server AddressAuthentication Failure Alert SettingsDisplays and configures failure & alert settings Cold StartAlert Items are shown below Schedule Settings Displays and configures schedule settingsDescription Schedule Date Month/DayFirst, 2, 3, 4, Last Date/Time SettingsDisplays and configures the date and time settings Time difference CycleSecurity Settings Up to 64 alphanumeric characters Configures the community name if Snmp is usedCommunity name Projector Control Adjusts the vertical picture position Adjusts the horizontal picture positionHdmi Detected Projector Status Displays the current projector statusRestarts the projector’s network connection When Logoff is clicked, the Logon menu is displayed. 14Network Restart LogoffMail Settings 19 Mail AlertsMail Alerts Projector Management using Snmp Snmp Settings 17Event Scheduling Schedule Settings 22 Event SchedulingDate/Time Settings 24 Manual conciseStill Image Transfer MY Image Still Image Transfer Display Network Restart on the main menuMessenger Function Messenger Function Communication Port Command Control via the NetworkFollowing two ports are assigned for the command control Command Control via the Network Header Data length RS-232C command Check Sum Connection Command FormatReply Error code TCP #9715Reply Data format Authentication Automatic Connection BreakConnecting devices LAN port Control portCondition Communication setupOperating Guide Transmission method HALF-DUPLEXHALF-DUPLEX FULL-DUPLEXDukane Corp AV Service Dept