Dukane 8111H user manual Command Control via the Network, Communication Port

Page 44

3. Network Functions

3.7 Command Control via the Network

You can configure and control the projector via the network using RS-232C commands.

Communication Port

The following two ports are assigned for the command control.

TCP #23(Network Control Port1 (Port: 23))

TCP #9715(Network Control Port2 (Port: 9715))

NOTE • Command control is available only via the specified port above.

Command Control Settings (17)

Configure the following items from a web browser when command control is used.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser.

2)Enter the Administrator ID and password and click [Logon].

3)Click [Port Settings] on the main menu.

4)Click [Enable] check box to open Network Control Port1 (Port: 23) to use TCP #23. Click [Enable] check box for [Authentication] setting when authentication is required, otherwise clear the check box.

5)Click [Enable] check box to open Network Control Port2 (Port: 9715) to use TCP #9715. Click [Enable] check box for [Authentication] setting when authentication is required, otherwise clear the check box.

6)Click [Apply] button to save the settings.

44

Image 44

Contents Thank you for purchasing this projector Web controlMY Image Still Image Transfer Display Messenger FunctionContent Main functions Equipment connection and network settingConfiguring and controlling the projector via a web browser Network FunctionsConfiguring and controlling via a web browser MY Image Still image Transfer DisplayMessenger Function Setup menu in the User’s Manual Operating Guide Required equipment preparationManual network connection setting Network settingsEquipments connection Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for computerFor example About IP address Setting manuallySetting automatically Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionConfiguring and Controlling the Projector via a Web Browser Projector Management using SnmpCommand Control via the Network Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password LogonProjector Name Displays the projector name settings Displays the Dhcp configuration settingsOnly displayed when logged on using an Administrator ID Network InformationDisplays and configures network settings Port Settings Displays and configures communication port settingsClick Apply button to save the settings Mail Settings Displays and configures e-mail addressing settingsSend mail Smtp Server AddressAlert Settings Displays and configures failure & alert settingsAuthentication Failure Cold StartAlert Items are shown below Schedule Settings Displays and configures schedule settingsDescription Schedule Date Month/DayFirst, 2, 3, 4, Last Date/Time SettingsDisplays and configures the date and time settings Time difference CycleSecurity Settings Up to 64 alphanumeric characters Configures the community name if Snmp is usedCommunity name Projector Control Adjusts the vertical picture position Adjusts the horizontal picture positionHdmi Detected Projector Status Displays the current projector statusWhen Logoff is clicked, the Logon menu is displayed. 14 Network RestartRestarts the projector’s network connection LogoffMail Settings 19 Mail AlertsMail Alerts Projector Management using Snmp Snmp Settings 17Event Scheduling Schedule Settings 22 Event SchedulingDate/Time Settings 24 Manual conciseStill Image Transfer MY Image Still Image Transfer Display Network Restart on the main menuMessenger Function Messenger Function Communication Port Command Control via the NetworkFollowing two ports are assigned for the command control Command Control via the Network Command Format Reply Error codeHeader Data length RS-232C command Check Sum Connection TCP #9715Reply Data format Authentication Automatic Connection BreakConnecting devices LAN port Control portCondition Communication setupOperating Guide Transmission method HALF-DUPLEXHALF-DUPLEX FULL-DUPLEXDukane Corp AV Service Dept