Dukane 8111H user manual Projector Management using Snmp, Snmp Settings 17

Page 36

3. Network Functions

3.3 Projector Management using SNMP

The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function.

NOTE • It is recommended that SNMP functions be carried out by a network administrator.

•SNMP management software must be installed on the computer to monitor the projector via SNMP.

SNMP Settings (17)

Configure the following items via a web browser to use SNMP. Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser.

2)Enter the Administrator ID and Password and click [Logon].

3)Click [Port Settings] on the main menu.

4)Click [Enable] check box to open the SNMP Port. Set the IP address to send the SNMP trap to when a Failure/Warning occurs.

NOTE • A Network Restart is required after the SNMP Port configuration settings have been changed. Click [Network Restart] and configure the following items.

5)Click [Security Settings] on the main menu.

6)Click [SNMP] and set the community name on the screen that is displayed.

NOTE • A Network Restart is required after the Community name has been changed. Click [Network Restart] and configure the following items.

7)Configure the settings for Trap transmission of Failures/Warnings. Click [Alert Settings] on the main menu and select the Failure/Warning item to be configured.

8)Click [Enable] check box to send out the SNMP trap for Failures/Warnings. Clear [Enable] check box when SNMP trap transmission is not required.

9)Click [Apply] button to save the settings.

36

Image 36

Contents Thank you for purchasing this projector Web controlMY Image Still Image Transfer Display Messenger FunctionContent Main functions Equipment connection and network settingConfiguring and controlling the projector via a web browser Network FunctionsConfiguring and controlling via a web browser MY Image Still image Transfer DisplayMessenger Function Setup menu in the User’s Manual Operating Guide Required equipment preparationManual network connection setting Network settingsEquipments connection Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for computerAbout IP address Setting manually Setting automaticallyFor example Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionConfiguring and Controlling the Projector via a Web Browser Projector Management using SnmpCommand Control via the Network Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password LogonProjector Name Displays the projector name settings Displays the Dhcp configuration settingsOnly displayed when logged on using an Administrator ID Network InformationDisplays and configures network settings Port Settings Displays and configures communication port settingsClick Apply button to save the settings Mail Settings Displays and configures e-mail addressing settingsSend mail Smtp Server AddressAlert Settings Displays and configures failure & alert settingsAuthentication Failure Cold StartAlert Items are shown below Schedule Settings Displays and configures schedule settingsDescription Schedule Date Month/DayDate/Time Settings Displays and configures the date and time settingsFirst, 2, 3, 4, Last Time difference CycleSecurity Settings Configures the community name if Snmp is used Community nameUp to 64 alphanumeric characters Projector Control Adjusts the vertical picture position Adjusts the horizontal picture positionHdmi Detected Projector Status Displays the current projector statusWhen Logoff is clicked, the Logon menu is displayed. 14 Network RestartRestarts the projector’s network connection LogoffMail Settings 19 Mail AlertsMail Alerts Projector Management using Snmp Snmp Settings 17Event Scheduling Schedule Settings 22 Event SchedulingDate/Time Settings 24 Manual conciseStill Image Transfer MY Image Still Image Transfer Display Network Restart on the main menuMessenger Function Messenger Function Command Control via the Network Following two ports are assigned for the command controlCommunication Port Command Control via the Network Command Format Reply Error codeHeader Data length RS-232C command Check Sum Connection TCP #9715Reply Data format Authentication Automatic Connection BreakConnecting devices LAN port Control portCommunication setup Operating GuideCondition Transmission method HALF-DUPLEXHALF-DUPLEX FULL-DUPLEXDukane Corp AV Service Dept