Dukane 8111H user manual Mail Alerts, Mail Settings 19

Page 34

3. Network Functions

3.2 E-mail Alerts

The projector can automatically send an alert message to the specified e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error.

NOTE • Up to five e-mail addresses can be specified.

•The projector may be not able to send e-mail if the projector suddenly loses power.

Mail Settings (19)

To use the projector’s e-mail alert function, please configure the following items through a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser.

2)Enter the Administrator ID and password and click [Logon].

3)Click [Port Settings] on the main menu.

4)Click [Enable] check box to open the SMTP Port.

5)Click [Apply] button to save the settings.

NOTE • A Network Restart is required after the SMTP Port configuration settings have changed. Click [Network Restart] and configure the following items.

6)Click [Mail Settings] and configure each item. Refer to the item 3.1.5 Mail Settings (19) for further information.

7)Click [Apply] button to save the settings.

NOTE • Click [Send Test Mail] button in [Mail Settings] to confirm that the e-mail settings are correct. The following mail will be delivered to the specified addresses.

Subject line	:Test Mail	<Projector name>
Text	:Send Test Mail
	Date	<Testing date>
	Time	<Testing time>
	IP Address	<Projector IP address>
	MAC Address	<Projector MAC address>

34

Image 34

Contents MY Image Still Image Transfer Display Thank you for purchasing this projectorWeb control Messenger FunctionConfiguring and controlling the projector via a web browser Content Main functionsEquipment connection and network setting Network FunctionsConfiguring and controlling via a web browser MY Image Still image Transfer DisplayMessenger Function Setup menu in the User’s Manual Operating Guide Required equipment preparationEquipments connection Manual network connection settingNetwork settings Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for computerSetting automatically About IP address Setting manuallyFor example Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionCommand Control via the Network Configuring and Controlling the Projector via a Web BrowserProjector Management using Snmp Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password LogonOnly displayed when logged on using an Administrator ID Projector Name Displays the projector name settingsDisplays the Dhcp configuration settings Network InformationDisplays and configures network settings Port Settings Displays and configures communication port settingsClick Apply button to save the settings Send mail Mail SettingsDisplays and configures e-mail addressing settings Smtp Server AddressAuthentication Failure Alert SettingsDisplays and configures failure & alert settings Cold StartAlert Items are shown below Schedule Settings Displays and configures schedule settingsDescription Schedule Date Month/DayDisplays and configures the date and time settings Date/Time SettingsFirst, 2, 3, 4, Last Time difference CycleSecurity Settings Community name Configures the community name if Snmp is usedUp to 64 alphanumeric characters Projector Control Adjusts the vertical picture position Adjusts the horizontal picture positionHdmi Detected Projector Status Displays the current projector statusRestarts the projector’s network connection When Logoff is clicked, the Logon menu is displayed. 14Network Restart LogoffMail Settings 19 Mail AlertsMail Alerts Projector Management using Snmp Snmp Settings 17Event Scheduling Schedule Settings 22 Event SchedulingDate/Time Settings 24 Manual conciseStill Image Transfer MY Image Still Image Transfer Display Network Restart on the main menuMessenger Function Messenger Function Following two ports are assigned for the command control Command Control via the NetworkCommunication Port Command Control via the Network Header Data length RS-232C command Check Sum Connection Command FormatReply Error code TCP #9715Reply Data format Authentication Automatic Connection BreakConnecting devices LAN port Control portOperating Guide Communication setupCondition Transmission method HALF-DUPLEXHALF-DUPLEX FULL-DUPLEXDukane Corp AV Service Dept