CH Tech EM405D Table C-1. Wireless Ethernet Configuration Default Settings, Wireless LAN Settings

APPENDIX C – WIRELESS ETHERNET (Wi-Fi) DEFAULT SETTINGS

The Ethernet interface device on the Wireless version of the EM405D contains many configurable settings that allow it to be used in a large number of applications. Many of these settings must be set to certain values in order for the EM405D to operate normally. Other settings are not applicable to the EM405D. When the user tries to configure the network settings via the web-interface, he/she will see options to change many of these settings. Changing some of these may make the EM405D inoperable. For this reason, it is highly recommended that the user does not change any settings other than the following:

∙IP Address

∙Subnet Mask

∙Gateway Address

∙Wireless LAN Settings

∙Wireless Security Settings

Table C-1 lists the various settings and their default values as set my C&H during manufacturing of the EM405D. If the carrier fails to operate, verify that these settings are set to their default values prior to calling C&H for technical support. Settings that are emphasized in bold italics are required settings that if changed will render the carrier inoperable.

Table C-1. Wireless Ethernet Configuration Default Settings.

Network

IP Settings
Obtain an IP address automatically using DHCP	True
Wireless LAN Settings
Connect to wireless access points (infrastructure)	True
Connect to any available wireless network	True
Country	United States
Channel	Auto-Scan
Wireless Security Settings
Enable WEP security	False
Enable WPA authentication	False
Network Services Settings
Enable ADDP	True
- Port	2362
Enable Encrypted RealPort	True
- Port	1027
Enable HTTP & HTTPS	True
- HTTP Port	80
- HTTPS Port	443

C-1