Delta Electronics manual DeviceNet Remote I/O Communication Module RTU-DNET

DeviceNet Remote I/O Communication Module RTU-DNET

Item	Function	Default
IO Module	How RTU-DNET will react when it detects errors. You can	Alarm
Error Treatment	choose “Ignored”, “Alarm” or “Stop DeviceNet IO”.
	For you to decide whether to add control word and status
Add control word	word to I/O data. When you choose not to do it, the I/O data
	in RTU-DNET and DeviceNet master will not include control
and status word to		Not to add
IO data	word and status word. If you choose to add them in, the I/O
	data in RTU-DNET and DeviceNet master will include
	control word and status word.

(14)Confirm all the configurations are correct and click on “Download” to download the configuration to RTU-DNET. After the download is completed, click on “OK".

2.Configuration of DVPDNET-SL

(1)Double click on DNET Scanner (node 01), and the “Scan Module Configuration…” dialog box will appear. You can find the currently available node, RTU-DNET, in the list on the left side. On the right side, there is an empty “Scan List”.

(2) Move the slave devices on DeviceNet in the “Available Nodes” list on the left side to the “Scan List” on the right side. Select a node and click on > . Follow the steps to move all the nodes to the scan list.

DVP-PLC Application Manual 27