Delta Electronics manual How to Construct a DeviceNet Network Using RTU-DNET, Dvpdnet-Sl

2.

Set up DVPDNET-SL and RTU-DNET according to the table below.

Module

Node address

Baud rate

DVPDNET-SL

1

500 kbps

RTU-DNET

2

500 kbps

3.

Pleae check if all Slim DI/DO extension units, special modules and RTU-DNET are working normally, if the

wiring of the entire network is correct, and if the power supply in DeviceNet is normal.

5.2 How to Configure Network by DeviceNet Network Configuration Tool

1.

Configuration of RTU-DNET

(1) Open DeviceNetBuilder software, as below:

22

DVP-PLC Application Manual