Delta Electronics manual DeviceNet Remote I/O Communication Module RTU-DNET

DeviceNet Remote I/O Communication Module RTU-DNET

(3)Confirm all the settings and click on “OK”. Next, download the configuration to DVPDNET-SL. If DVP-SV is in RUN mode while you are downloading the configuration, a "Warning” dialog box will appear.

(4)Click on “OK” to continue the download. Make sure DVP-SV is in RUN mode. Now, you can see the MS LED and NS LED on RTU-DNET become green.

3.Follow the steps given above to configure DeviceNet network. If the I/O data do not include control word and status word of RTU-DNET, the I/O data mapping of DVPDNET-SL and RTU-DNET will be:

28 DVP-PLC Application Manual