DeviceNet Remote I/O Communication Module RTU-DNET
(6)Click on “OK”, and DeviceNetBuilder will start to scan the entire network.
(7)If the bar on the dialog box does not progress, it means the connection between the PC and DVP-SVis abnormal, or there are other programs also usinig the COM port on the PC. After the scan is completed, the dialog box will tell you that the scan is completed, and the icons and device names of all the nodes scanned on the network will be shown on the screen. See the figure below, in which the node address of DVPDNET-SL is 01.
(8) Double click on RTU-DNET (node 02), and the “Node Configuration…dialog box will appear.
24 | DVP-PLC Application Manual |
