Onkyo SKB-960, SKF-960F, HT-R960 Remote Controller, Subwoofer SKW-960, Front, Standby/On indicator

Remote Controller—Continued

Subwoofer (SKW-960)

■ Front	For further information, see the pages in parentheses.
	A Standby/On indicator
	Red:	Subwoofer in standby mode
	Blue:	Subwoofer on

With the Auto Standby function, the SKW-960 automatically turns on when an input signal is detected in Standby mode. When there’s no input signal for a while, the SKW-960 automatically enters Standby mode.

	B OUTPUT LEVEL control (50)
	Adjusts the volume of the subwoofer.
	C LINE INPUT (21)
	Connects to the AV receiver’s SUBWOOFER PRE
1	OUT jack with the supplied RCA cable.

■Rear

Note:

• The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try increasing or decreasing the subwoofer output level slightly on the AV receiver (see page 79).

• The front grilles are not designed to be removed so do not attempt to remove them forcibly, as this will dam- age them.

2 3

To wall outlet

15