Onkyo SKW-960, SKF-960F, SKC-960C, SKB-960, HT-R960, SKM-960S Audio TV Out, Lip Sync, Color, Control

Page 90

Advanced Setup—Continued

Audio TV Out

This setting determines whether audio received by an HDMI input is output by the HDMI OUT. You may want to change this setting to On if your TV is connected to an HDMI OUT and you want to listen to audio from an HDMI component through your TV’s speakers. Nor- mally, it should be set to Off.

Off: HDMI audio is not output (default).

On: HDMI audio is output.

Notes:

If On is selected and the signal can be output by the TV, the AV receiver will output no sound through its speakers.

When TV Control is enabled, this setting is set to Auto.

With some TVs and input signals, no sound may be output even if On is selected.

When the Audio TV Out setting is set to On, or TV Control is set to Enable and you’re listening through your TV’s speakers (see page 35), if you turn up the AV receiver’s volume control, the sound will be output by the AV receiver’s speakers. To stop the AV receiver’s speakers producing sound, change the set- tings, change your TV’s settings, or turn down the AV receiver’s volume.

Lip Sync

The Lip Sync function can automatically synchronize HDMI audio and video that’s gotten out of sync due to the complex digital video processing being performed by your HDMI-compatible TV. With HDMI Lip Sync, the audio delay required to synchronize the audio and video is calculated and applied automatically by the AV receiver.

Disable: HDMI lip sync disabled.

Enable: HDMI lip sync enabled.

Notes:

This function works only if your HDMI-compatible TV supports HDMI Lip Sync.

You can check the amount of delay being applied by the HDMI Lip Sync function on the A/V Sync screen (see page 86).

x.v.Color

If your HDMI source and HDMI-compatible TV both support x.v.Color, you can enable x.v.Color on the AV receiver with this setting.

Disable: x.v.Color disabled.

Enable: x.v.Color enabled.

Control

This function allows RIHD-compatible components connected via HDMI to be controlled with the AV receiver.

Disable: RIHD disabled.

Enable: RIHD enabled.

Notes:

RIHD, which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however, operation with components other than RIHD-compatible components and recommended components cannot be guaranteed.

Select Disable if a connected component is incompat- ible or you’re not sure about its compatibility.

If operation is unreliable when set to Enable, select Disable instead.

Power Control

To link the power functions of RIHD-compatible com- ponents connected via HDMI, select Enable.

Disable: Power Control disabled.

Enable: Power Control enabled.

Notes:

The Power Control setting can be set only when the above Control setting is set to Enable.

HDMI power control only works with RIHD-compat- ible components that support it and may not work properly with some components due to their settings or compatibility.

When set to Enable, the AV receiver consumes more power.

When set to Enable, the AV receiver enters Ready mode when set to Standby, and the STANDBY indica- tor lights up.

When set to Enable, regardless of whether the AV receiver is On or on Standby, both audio and video received by an HDMI input will be output by the HDMI OUT for playback on your TV or other compo- nent that’s connected to the HDMI OUT.

90

Image 90
Contents HT-S9100THX Important Safety Instructions AvisPreventing Hearing Loss Caution PrecautionsPower Batteries and Heat Exposure WarningPlacement Speaker PrecautionsPrecautions Using Close to a TV or ComputerPackage Contents Contents Contents Processing FeaturesAmplifier ConnectionsAutomatic speaker setup Input setup Input display Getting Started in Five Easy StepsGetting to Know the AV Receiver Front PanelGetting to Know the AV Receiver DisplayRear Panel Subwoofer PRE OUT Using the Cork Spacers for a More Stable Platform Speaker PackageSubwoofer SKW-960 Remote ControllerStandby/On indicator FrontRemote Controller Controlling the AV ReceiverInstalling the Batteries Using the Remote ControllerSpeaker Set a Main Room Connecting the SpeakersEnjoying Home Theater Speaker Set B Sub RoomIndicator Output Center speakerSubwoofer Front Speakers SKF-960F Connecting the SpeakersWall Mounting the Speakers Surround SKM-960S and Surround Back Speakers SKB-960Speaker Connection Precautions Connecting Speaker Set aConnecting Speaker Set B not included Speaker Set a Speaker Set BConnecting the Indoor FM Antenna Connecting AntennasConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor AM Antenna Connecting AntennasConnecting an Outdoor FM Antenna Using a TV/FM Antenna SplitterOptical Digital Jacks Connecting Your ComponentsAbout AV Connections AV Connection Color CodingWhich Connections Should I Use? Connecting Your ComponentsConnecting Audio and Video Signals to the AV Receiver Audio Connection FormatsVideo Signal Flow Chart DVD player, etc Video Connection FormatsTV, projector, etc Audio Connection Connecting a TV or ProjectorVideo Connection HintConnecting a DVD player DVD playerHooking Up the Multichannel Input DigitalConnecting a VCR or DVR for Playback VCR or DVRConnecting a VCR or DVR for Recording Make the audio connection aConnect one or the other Inputs may need to be Assigned see Supported Audio Formats Connecting Components with HdmiAbout Hdmi About Copyright ProtectionVideo Signals Audio SignalsMaking Hdmi Connections Camcorder Game console, etc Connecting a Camcorder, Game Console, or Other DeviceMake the video connection a Make the audio connection a Camcorder or consoleCD or turntable StepCD player Phono preampConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Cassette, CDR, MD, etcIf Your iPod Supports Video Connecting an RI DockNot all iPod models output video If Your iPod Doesn’t Support VideoAuto Power On/Standby Connecting Onkyo ComponentsConnecting the Power Cord Remote ControlTurning On and Standby Do the automatic speaker setup-this is essentialTurning On the AV Receiver Up and Running in a Few Easy StepsUsing Audyssey 2EQ First Time SetupAutomatic Speaker Setup Measurement PositionsOutput Level control to First Time SetupOn the SKW-960 Subwoofer, set Press EnterError Messages Using a Powered Subwoofer To Retry the Automatic Speaker SetupChanging the Speaker Settings Manually Write ErrorHdmi Input Setup Main menu appears onscreen Component Video Input SetupDigital Input Setup Sure the appropriate external input isHdmi Input Setup on page 46, this input assign Changing the Input DisplayAutomatic Audio Input Selection Setup Playing Your AV Components Select a listening mode and enjoySee Using the Listening Modes on Basic AV Receiver OperationCommon Functions Setting the Display BrightnessUsing the Sleep Timer Muting the AV Receiver7Using Headphones Common FunctionsDisplaying Source Information Digital Input button for about Specifying the Digital Signal FormatPress and hold the AV receiver’s SecondsTuning into AM/FM Radio Stations Listening to the RadioListening to AM/FM Stations Tuning into Stations by Frequency Listening to the RadioDisplaying AM/FM Radio Information Presetting AM/FM Stations Deleting PresetsSelecting Presets Using RDS European model only What is RDS?RDS Program Types PTY Displaying Radio Text RT Listening to Traffic News TPFinding Stations by Type PTY Selecting the Listening Modes Using the Listening ModesSelecting with the Remote Controller Selecting on the AV ReceiverUsing the Listening Modes Listening Modes Available for Each Source FormatAnalog and PCM Sources Game Dolby Digital and Dolby Digital Plus Sources MOVIE/TVUsing the Listening Modes DTS Sources DTSTHX TrueHD Sources Multichannel 2ch DTS-HD Sources THX DTS Express and DSD Sources Listening Mode DTS Express About the Listening Modes DTS Neo6 DTS-HD High Resolution AudioDTS-ES Matrix Neo6 CinemaOnkyo Original DSP Modes Recording Recording the Input SourceRecording from Different AV Sources Multiplex/Mono Settings Adjusting the Listening ModesUsing the Audio Adjust Settings PLIIx/Neo6 SettingsTheater-Dimensional Setting Adjusting the Listening ModesDolby EX Setting LFE Level SettingsLate Night Function Using the Audio FunctionsTone Control Re-EQ THXMusic Optimizer Audyssey Dynamic EQSpeaker Levels SyncListening Mode Presets Press the Receiver button, followed by the Setup button Advanced SetupSpeaker Setup Speaker ConfigurationAdvanced Setup Speaker DistancePink noise test tone is output by the front left speaker Equalizer Settings Setup menu closesButtons to select BGC Boundary Gain Compensation Setting THX Audio SetupSurround Back SP Spacing Setting Loudness PlusSource Setup IntelliVolumeMiscellaneous Setup Volume SetupOSD Setup Hardware Setup Remote ControlAnalog Multich Color Audio TV OutLip Sync ControlLock Setup Buttons to select 8. Lock SetupThen press Enter Use the Left and Right Buttons to select Preprogrammed Remote Control Codes Entering Remote Control CodesControlling Other Components Resetting the Remote Mode Buttons Resetting the Remote ControllerRemote Control Codes for Onkyo Components Connected via Controlling Other ComponentsControlling a TV Controlling a DVD Player or DVD Recorder Previous button Play Mode buttonControlling a VCR or PVR Next buttonCancels functions or clears entered numbers Controlling a Satellite Receiver or Cable ReceiverControlling a CD Player, CD Recorder, or MD Player Search buttonDisc +/- button Controlling an RI Dock Controlling a Cassette Recorder Troubleshooting Troubleshooting There’s no picture from a source connected to an Hdmi Remote controller doesn’t workSound changes when I connect my head- phones Can’t control other componentsImportant Note Regarding Video Playback Nent Video OUTSpecifications AV receiver HT-R960Speaker Package HTP-960 Powered Subwoofer SKW-960Specifications Front/Center Speaker SKF-960F/SKC-960CVideo Resolution Chart InputMain menu Onscreen Setup Menu MapMenu Map Submenu PagesMemo 110 111 Onkyo Europe Electronics GmbH Onkyo Europe UK Office