Onkyo HT-R960, SKW-960, SKF-960F, SKC-960C, SKB-960, SKM-960S Hardware Setup, Remote Control

Advanced Setup—Continued

■Monitor Type

With this setting, you can specify the aspect ratio of your TV so that menus are displayed properly.

16:9: Select if your TV is 16:9 (default). 4:3: Select if your TV is 4:3.

■Display Position

This setting determines where on the screen operation details are displayed.

Bottom: Bottom of the screen (default).

Top: Top of the screen.

■TV format (on some country)

For the onscreen setup menus to display properly, you must specify the TV system used in your area.

Auto: Select this to have the AV receiver automati- cally detect the TV system from the video input signals.

NTSC: Select if the TV system in your area is NTSC. PAL: Select if the TV system in your area is PAL.

Hardware Setup

This section explains items on the Hardware menu.

Remote indicator

RECEIVER

ENTER

SETUP

Number buttons

1	Press the [RECEIVER] REMOTE
	MODE button, followed by the
	[SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2	Use the Up and Down [ ]/[ ]
	buttons to select “7. Hardware
	Setup,” and then press [ENTER].

3	Use the Up and Down [ ]/[ ]
	buttons to select an item, and
	then press [ENTER].
	The screen for that item appears.

4	Use the Up and Down [	]/[	]
	buttons to select an item, and
	use the Left and Right [	]/[	]

buttons to change it.

The items are explained below.

5	When you’ve finished, press the
	[SETUP] button.
	Setup closes.

Note:

•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

Remote Control

■Remote ID

When several Onkyo components are used in the same room, their remote ID codes may overlap. To differenti- ate the AV receiver from the other components, you can change its remote ID from 1, the default, to 2 or 3.

Note:

•If you do change the AV receiver’s remote ID, be sure to change the remote controller to the same ID (see below), otherwise, you won’t be able to control it with the remote controller.

88