Onkyo SKW-960, SKB-960 Changing the Input Display, Hdmi Input Setup on page 46, this input assign

First Time Setup—Continued

2 Use the Up and Down []/[ ] buttons to select “1. Input Assign,” and then press [ENTER].

3 Use the Up and Down []/[ ] buttons to select “3. Digital Audio Input,” and then press [ENTER].

4 Use the Up and Down []/[ ] buttons to select an input selec- tor, and then use the Left and Right []/[ ] buttons to select: COAX1: Select if the component is

the“Automatic Audio Input Selection Setup” on page 49 to the same input (e.g., COAX1 (Auto) or COAX2 (Auto)).

•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

Changing the Input Display

If you connect an -capable Onkyo MiniDisc recorder, CD recorder, or RI Dock to the TAPE IN/OUT jacks, or connect an RI Dock to the CBL/SAT IN jacks,

for to work properly, you must change this setting.

This setting can only be changed on the AV receiver.

1, 2

1, 2

MASTER VOLUME

ON/STANDBY

TUNING

PRESET

STANDBY

THX

MULTI CH

DVD

VCR/DVR

CBL/SAT

AUX

TAPE

TUNER

CD

SETUP

RETURN

AUX INPUT

PHONES

SETUP MIC

VIDEO

L AUDIO R

A SPEAKERS B

TONE

MOVIE/TV

MUSIC

GAME

DISPLAY

DIGITAL INPUT

RT/PTY/TP

MEMORY TUNING MODE

LISTENING MODE

AV RECEIVER HT-R960

iPod with video: If you’re using an iPod that supports video output with the DS-A1 RI Dock, connect the DS-A1 to the CBL/SAT IN jacks.

connected to DIGITAL IN COAXIAL 1.

COAX2: Select if the component is connected to DIGITAL IN COAXIAL 2.

OPT1: Select if the component is connected to DIGITAL IN OPTICAL 1.

1

TAPE

or

CBL/SAT

Press the [TAPE] or [CBL/SAT] input selector button so that “TAPE” or “CBL/SAT” appears on the display.

OPT2: Select if the component is connected to DIGITAL IN OPTICAL 2.

- - - - -:Select if the component is connected to an analog input.

5	Press the [SETUP] button.
	Setup closes.

Notes:

• When an HDMI IN is assigned to an input selector in

“HDMI Input Setup” on page 46, this input assign-

ment is automatically set to the same HDMI IN. And

in addition to the usual inputs (e.g., COAX1, COAX2,

2

TAPE

or

CBL/SAT

Press and hold down the [TAPE] or [CBL/SAT] input selector but- ton (about 3 seconds) to change the setting.

Repeat this step to select MD, CDR, or DOCK.

For the TAPE input selector, the setting changes in this order:

TAPE → MD → CDR

→	DOCK
	→

For the CBL/SAT input selector, the setting changes in this order:

CBL/SAT ↔ DOCK

etc.), you can also select HDMI inputs. If you change

the input assignment from an HDMI IN to one of the

other inputs (e.g., COAX1 or COAX2), be sure to set

Note:

•DOCK can be selected for the TAPE input selector or CBL/SAT input selector, but not both at the same time.

48