Onkyo SKM-960S Component Video Input Setup, Digital Input Setup, Main menu appears onscreen

First Time Setup—Continued

Component Video Input Setup

If you connect a video component to a COMPONENT VIDEO IN, you must assign that input to an input selector. For example, if you connect your DVD player to COMPONENT VIDEO IN 2, you must assign COM- PONENT VIDEO IN 2 to the DVD input selector.

These are the default assignments.

Input selector	Video input
DVD	IN1
VCR/DVR	- - - - -
CBL/SAT	IN2
AUX	- - - - -
TAPE	- - - - -
CD	- - - - -

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.
2	Use the Up and Down [ ]/[ ]

buttons to select “1. Input Assign,” and then press [ENTER].

3 Use the Up and Down []/[ ] buttons to select “2. Component Video Input,” and then press [ENTER].

4 Use the Up and Down []/[ ] buttons to select an input selec- tor, and use the Left and Right []/[ ] buttons to select:

IN1: Select if the video compo- nent is connected to COM-

PONENT VIDEO IN 1. IN2: Select if the video compo-

nent is connected to COM-

PONENT VIDEO IN 2.

- - - - -:Select if you’re not using the

COMPONENT VIDEO OUT.

5	Press the [SETUP] button.
	Setup closes.

Note:

•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

Digital Input Setup

If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to OPTICAL IN 1, you must assign OPTICAL IN 1 to the CD input selector.

These are the default assignments.

Input selector	Audio input
DVD	COAX1
VCR/DVR	OPT1
CBL/SAT	COAX2
AUX	- - - - -
TAPE	- - - - -
CD	OPT2

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.

47