Onkyo SKW-960, SKF-960F, SKC-960C, SKB-960 Equalizer Settings, Buttons to select, Setup menu closes

Page 84

Advanced Setup—Continued

Equalizer Settings

These settings are set automatically by the Automatic Speaker Setup function (see page 42).

Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 83.

1

Press the [RECEIVER] REMOTE

 

 

MODE button, followed by the

 

[SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2

Use the Up and Down [ ]/[ ]

 

buttons to select “2. Speaker

Setup,” and then press [ENTER].

3 Use the Up and Down []/[ ] buttons to select “4. Equalizer Settings,” and then press [ENTER].

5

6

7

Press the Down [

] button, and

then use the Left and Right

[ ]/[ ] buttons to select a

speaker.

 

 

 

 

 

 

 

 

 

 

 

 

 

2–5. Equalizer Settings

 

 

 

 

 

 

 

 

 

 

 

 

Equalizer

 

Manual

 

 

 

Channel

 

Front

 

 

 

 

63Hz

 

0dB

 

 

 

250Hz

 

0dB

 

 

 

1000Hz

 

0dB

 

 

 

4000Hz

 

0dB

 

 

 

16000Hz

 

0dB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use the Up and Down []/[ ] buttons to select a frequency. Use the Left and Right []/[ ] buttons to adjust the level at that frequency.

The volume at each frequency can be adjusted from –6 to +6 dB in 1 dB steps.

Tip: Low frequencies (e.g., 63 Hz) affect bass sounds; high frequencies (e.g., 16000 Hz) affect treble sounds.

Use the Up [] button to select “Channel,” and then use the Left and Right []/[ ] buttons to select another speaker.

Repeat steps 5 and 6 for each speaker. Speakers that you’ve set to No in the “Speaker Configuration” on page 81 cannot be selected.

4

Use the Left and Right [ ]/[ ]

 

buttons to select:

Off: Tone off, response flat. Audyssey®: The tone for each speaker

is set automatically by the Automatic Speaker Setup function. Be sure to select this setting after having performed the Automatic Speaker Setup.

Manual: You can adjust the equal- izer for each speaker manually.

If you selected Manual, continue with this procedure. If you selected Off or Audyssey, go to step 8.

8

Press the [SETUP] button.

 

 

The setup menu closes.

Notes:

The front, center, surround, and surround back speak- ers can be adjusted at 63 Hz, 250 Hz, 1000 Hz,

4000 Hz, and 16000 Hz. The subwoofer can be adjusted at 25 Hz, 40 Hz, 63 Hz, 100 Hz, and 160 Hz.

While the Direct listening mode is selected, the equal- izer settings have no effect.

This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

84

Image 84
Contents HT-S9100THX Important Safety Instructions AvisPrecautions PowerPreventing Hearing Loss Caution Batteries and Heat Exposure WarningSpeaker Precautions PrecautionsPlacement Using Close to a TV or ComputerPackage Contents Contents Contents Features AmplifierProcessing ConnectionsAutomatic speaker setup Input setup Input display Getting Started in Five Easy StepsGetting to Know the AV Receiver Front PanelGetting to Know the AV Receiver DisplayRear Panel Subwoofer PRE OUT Using the Cork Spacers for a More Stable Platform Speaker PackageRemote Controller Standby/On indicatorSubwoofer SKW-960 FrontRemote Controller Controlling the AV ReceiverInstalling the Batteries Using the Remote ControllerConnecting the Speakers Enjoying Home TheaterSpeaker Set a Main Room Speaker Set B Sub RoomIndicator Output Center speakerSubwoofer Connecting the Speakers Wall Mounting the SpeakersFront Speakers SKF-960F Surround SKM-960S and Surround Back Speakers SKB-960Speaker Connection Precautions Connecting Speaker Set aConnecting Speaker Set B not included Speaker Set a Speaker Set BConnecting Antennas Connecting the AM Loop AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shown American ModelConnecting Antennas Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Audio and Video Signals to the AV ReceiverWhich Connections Should I Use? Audio Connection FormatsVideo Signal Flow Chart DVD player, etc Video Connection FormatsTV, projector, etc Connecting a TV or Projector Video ConnectionAudio Connection HintConnecting a DVD player DVD playerHooking Up the Multichannel Input DigitalConnecting a VCR or DVR for Playback VCR or DVRConnecting a VCR or DVR for Recording Make the audio connection aConnect one or the other Inputs may need to be Assigned see Connecting Components with Hdmi About HdmiSupported Audio Formats About Copyright ProtectionVideo Signals Audio SignalsMaking Hdmi Connections Connecting a Camcorder, Game Console, or Other Device Make the video connection a Make the audio connection aCamcorder Game console, etc Camcorder or consoleStep CD playerCD or turntable Phono preampConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Cassette, CDR, MD, etcConnecting an RI Dock Not all iPod models output videoIf Your iPod Supports Video If Your iPod Doesn’t Support VideoConnecting Onkyo Components Connecting the Power CordAuto Power On/Standby Remote ControlDo the automatic speaker setup-this is essential Turning On the AV ReceiverTurning On and Standby Up and Running in a Few Easy StepsFirst Time Setup Automatic Speaker SetupUsing Audyssey 2EQ Measurement PositionsFirst Time Setup On the SKW-960 Subwoofer, setOutput Level control to Press EnterError Messages To Retry the Automatic Speaker Setup Changing the Speaker Settings ManuallyUsing a Powered Subwoofer Write ErrorHdmi Input Setup Component Video Input Setup Digital Input SetupMain menu appears onscreen Sure the appropriate external input isHdmi Input Setup on page 46, this input assign Changing the Input DisplayAutomatic Audio Input Selection Setup Select a listening mode and enjoy See Using the Listening Modes onPlaying Your AV Components Basic AV Receiver OperationSetting the Display Brightness Using the Sleep TimerCommon Functions Muting the AV Receiver7Using Headphones Common FunctionsDisplaying Source Information Specifying the Digital Signal Format Press and hold the AV receiver’sDigital Input button for about SecondsTuning into AM/FM Radio Stations Listening to the RadioListening to AM/FM Stations Tuning into Stations by Frequency Listening to the RadioDisplaying AM/FM Radio Information Presetting AM/FM Stations Deleting PresetsSelecting Presets Using RDS European model only What is RDS?RDS Program Types PTY Displaying Radio Text RT Listening to Traffic News TPFinding Stations by Type PTY Using the Listening Modes Selecting with the Remote ControllerSelecting the Listening Modes Selecting on the AV ReceiverUsing the Listening Modes Listening Modes Available for Each Source FormatAnalog and PCM Sources Game Dolby Digital and Dolby Digital Plus Sources MOVIE/TVUsing the Listening Modes DTS Sources DTSTHX TrueHD Sources Multichannel 2ch DTS-HD Sources THX DTS Express and DSD Sources Listening Mode DTS Express About the Listening Modes DTS-HD High Resolution Audio DTS-ES MatrixDTS Neo6 Neo6 CinemaOnkyo Original DSP Modes Recording Recording the Input SourceRecording from Different AV Sources Adjusting the Listening Modes Using the Audio Adjust SettingsMultiplex/Mono Settings PLIIx/Neo6 SettingsAdjusting the Listening Modes Dolby EX SettingTheater-Dimensional Setting LFE Level SettingsUsing the Audio Functions Tone ControlLate Night Function Re-EQ THXAudyssey Dynamic EQ Speaker LevelsMusic Optimizer SyncListening Mode Presets Advanced Setup Speaker SetupPress the Receiver button, followed by the Setup button Speaker ConfigurationAdvanced Setup Speaker DistancePink noise test tone is output by the front left speaker Equalizer Settings Setup menu closesButtons to select THX Audio Setup Surround Back SP Spacing SettingBGC Boundary Gain Compensation Setting Loudness PlusSource Setup IntelliVolumeMiscellaneous Setup Volume SetupOSD Setup Hardware Setup Remote ControlAnalog Multich Audio TV Out Lip SyncColor ControlLock Setup Buttons to select 8. Lock SetupThen press Enter Use the Left and Right Buttons to select Preprogrammed Remote Control Codes Entering Remote Control CodesControlling Other Components Resetting the Remote Controller Remote Control Codes for Onkyo Components Connected viaResetting the Remote Mode Buttons Controlling Other ComponentsControlling a TV Controlling a DVD Player or DVD Recorder Play Mode button Controlling a VCR or PVRPrevious button Next buttonCancels functions or clears entered numbers Controlling a Satellite Receiver or Cable ReceiverControlling a CD Player, CD Recorder, or MD Player Search buttonDisc +/- button Controlling an RI Dock Controlling a Cassette Recorder Troubleshooting Troubleshooting Remote controller doesn’t work Sound changes when I connect my head- phonesThere’s no picture from a source connected to an Hdmi Can’t control other componentsImportant Note Regarding Video Playback Nent Video OUTSpecifications AV receiver HT-R960Powered Subwoofer SKW-960 SpecificationsSpeaker Package HTP-960 Front/Center Speaker SKF-960F/SKC-960CVideo Resolution Chart InputOnscreen Setup Menu Map Menu MapMain menu Submenu PagesMemo 110 111 Onkyo Europe Electronics GmbH Onkyo Europe UK Office