Onkyo SKF-960F, SKW-960, SKC-960C THX Audio Setup, Surround Back SP Spacing Setting, Loudness Plus

Page 85

Advanced Setup—Continued

THX Audio Setup

These settings apply to only speaker set A.

These settings are not set automatically by the Auto- matic Speaker Setup function (see page 42).

1

Press the [RECEIVER] REMOTE

 

 

MODE button, followed by the

 

[SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2

Use the Up and Down [ ]/[ ]

 

buttons to select “2. Speaker

Setup,” and then press [ENTER].

3

Use the Up and Down [ ]/[ ]

 

buttons to select “5. THX Audio

Setup,” and then press [ENTER].

4

Use the Left and Right [ ]/[ ]

 

buttons to change the setting.

Press the Down [ ] button to select the next setting.

Repeat this step for the other settings. The THX Audio settings are explained below.

5

Press the [SETUP] button.

 

 

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

Surround Back SP Spacing Setting

This setting is only available if the Surr Back Ch setting in the “Speaker Configuration” on page 81 is set to 2ch. With this setting, you can specify the distance between your surround back speakers.

<1 ft (<0.3 m):

Select this if the speakers are between 0 and 1 foot (0–30 cm) apart.

1–4 ft (0.3–1.2 m):

Select this if the speakers are between 1 and 4 feet (0.3–1.2 m) apart.

>4 ft (>1.2 m) (Default):

Select this if the speakers are more than 4 feet (1.2 m) apart.

BGC (Boundary Gain Compensation) Setting

A room’s boundaries (i.e., walls) and their construction may make bass sounds louder when the listening posi- tion or subwoofer is positioned close to such a boundary. This is called the boundary gain effect. With this setting, you can compensate for this and achieve a more accurate and flatter bass response.

On: Boundary Gain Compensation on.

Off: Boundary Gain Compensation off (default).

Loudness Plus

THX Loudness Plus uses THX Multi-channel Spectral Balancing and THX Dynamic Ambience Preservation technologies to preserve the ambient sound and rich detail of surround sound in movies, video games, and music when listening at lower volume levels, providing an accurate listening experience at any volume.

On: Loudness Plus on.

Off: Loudness Plus off.

85

Image 85
Contents HT-S9100THX Avis Important Safety InstructionsPower PrecautionsPreventing Hearing Loss Caution Batteries and Heat Exposure WarningPrecautions Speaker PrecautionsPlacement Using Close to a TV or ComputerPackage Contents Contents Contents Amplifier FeaturesProcessing ConnectionsGetting Started in Five Easy Steps Automatic speaker setup Input setup Input displayFront Panel Getting to Know the AV ReceiverDisplay Getting to Know the AV ReceiverRear Panel Subwoofer PRE OUT Speaker Package Using the Cork Spacers for a More Stable PlatformStandby/On indicator Remote ControllerSubwoofer SKW-960 FrontControlling the AV Receiver Remote ControllerUsing the Remote Controller Installing the BatteriesEnjoying Home Theater Connecting the SpeakersSpeaker Set a Main Room Speaker Set B Sub RoomCenter speaker Indicator OutputSubwoofer Wall Mounting the Speakers Connecting the SpeakersFront Speakers SKF-960F Surround SKM-960S and Surround Back Speakers SKB-960Connecting Speaker Set a Speaker Connection PrecautionsConnecting Speaker Set B not included Speaker Set B Speaker Set aConnecting the AM Loop Antenna Connecting AntennasConnecting the Indoor FM Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor FM Antenna Connecting AntennasConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterAbout AV Connections Connecting Your ComponentsOptical Digital Jacks AV Connection Color CodingConnecting Audio and Video Signals to the AV Receiver Connecting Your ComponentsWhich Connections Should I Use? Audio Connection FormatsVideo Connection Formats Video Signal Flow Chart DVD player, etcTV, projector, etc Video Connection Connecting a TV or ProjectorAudio Connection HintDVD player Connecting a DVD playerDigital Hooking Up the Multichannel InputVCR or DVR Connecting a VCR or DVR for PlaybackMake the audio connection a Connecting a VCR or DVR for RecordingConnect one or the other Inputs may need to be Assigned see About Hdmi Connecting Components with HdmiSupported Audio Formats About Copyright ProtectionAudio Signals Video SignalsMaking Hdmi Connections Make the video connection a Make the audio connection a Connecting a Camcorder, Game Console, or Other DeviceCamcorder Game console, etc Camcorder or consoleCD player StepCD or turntable Phono preampCassette, CDR, MD, etc Connecting a Cassette, CDR, MiniDisc, or DAT RecorderNot all iPod models output video Connecting an RI DockIf Your iPod Supports Video If Your iPod Doesn’t Support VideoConnecting the Power Cord Connecting Onkyo ComponentsAuto Power On/Standby Remote ControlTurning On the AV Receiver Do the automatic speaker setup-this is essentialTurning On and Standby Up and Running in a Few Easy StepsAutomatic Speaker Setup First Time SetupUsing Audyssey 2EQ Measurement PositionsOn the SKW-960 Subwoofer, set First Time SetupOutput Level control to Press EnterError Messages Changing the Speaker Settings Manually To Retry the Automatic Speaker SetupUsing a Powered Subwoofer Write ErrorHdmi Input Setup Digital Input Setup Component Video Input SetupMain menu appears onscreen Sure the appropriate external input isChanging the Input Display Hdmi Input Setup on page 46, this input assignAutomatic Audio Input Selection Setup See Using the Listening Modes on Select a listening mode and enjoyPlaying Your AV Components Basic AV Receiver OperationUsing the Sleep Timer Setting the Display BrightnessCommon Functions Muting the AV ReceiverCommon Functions 7Using HeadphonesDisplaying Source Information Press and hold the AV receiver’s Specifying the Digital Signal FormatDigital Input button for about SecondsListening to the Radio Tuning into AM/FM Radio StationsListening to AM/FM Stations Listening to the Radio Tuning into Stations by FrequencyDisplaying AM/FM Radio Information Deleting Presets Presetting AM/FM StationsSelecting Presets What is RDS? Using RDS European model onlyRDS Program Types PTY Listening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Selecting with the Remote Controller Using the Listening ModesSelecting the Listening Modes Selecting on the AV ReceiverListening Modes Available for Each Source Format Using the Listening ModesAnalog and PCM Sources Game MOVIE/TV Dolby Digital and Dolby Digital Plus SourcesUsing the Listening Modes DTS DTS SourcesTHX TrueHD Sources Multichannel 2ch DTS-HD Sources THX DTS Express and DSD Sources Listening Mode DTS Express About the Listening Modes DTS-ES Matrix DTS-HD High Resolution AudioDTS Neo6 Neo6 CinemaOnkyo Original DSP Modes Recording the Input Source RecordingRecording from Different AV Sources Using the Audio Adjust Settings Adjusting the Listening ModesMultiplex/Mono Settings PLIIx/Neo6 SettingsDolby EX Setting Adjusting the Listening ModesTheater-Dimensional Setting LFE Level SettingsTone Control Using the Audio FunctionsLate Night Function Re-EQ THXSpeaker Levels Audyssey Dynamic EQMusic Optimizer SyncListening Mode Presets Speaker Setup Advanced SetupPress the Receiver button, followed by the Setup button Speaker ConfigurationSpeaker Distance Advanced SetupPink noise test tone is output by the front left speaker Setup menu closes Equalizer SettingsButtons to select Surround Back SP Spacing Setting THX Audio SetupBGC Boundary Gain Compensation Setting Loudness PlusIntelliVolume Source SetupVolume Setup Miscellaneous SetupOSD Setup Remote Control Hardware SetupAnalog Multich Lip Sync Audio TV OutColor ControlButtons to select 8. Lock Setup Lock SetupThen press Enter Use the Left and Right Buttons to select Entering Remote Control Codes Preprogrammed Remote Control CodesControlling Other Components Remote Control Codes for Onkyo Components Connected via Resetting the Remote ControllerResetting the Remote Mode Buttons Controlling Other ComponentsControlling a TV Controlling a DVD Player or DVD Recorder Controlling a VCR or PVR Play Mode buttonPrevious button Next buttonControlling a Satellite Receiver or Cable Receiver Cancels functions or clears entered numbersSearch button Controlling a CD Player, CD Recorder, or MD PlayerDisc +/- button Controlling an RI Dock Controlling a Cassette Recorder Troubleshooting Troubleshooting Sound changes when I connect my head- phones Remote controller doesn’t workThere’s no picture from a source connected to an Hdmi Can’t control other componentsNent Video OUT Important Note Regarding Video PlaybackAV receiver HT-R960 SpecificationsSpecifications Powered Subwoofer SKW-960Speaker Package HTP-960 Front/Center Speaker SKF-960F/SKC-960CInput Video Resolution ChartMenu Map Onscreen Setup Menu MapMain menu Submenu PagesMemo 110 111 Onkyo Europe UK Office Onkyo Europe Electronics GmbH