Onkyo SKF-960F, SKC-960C First Time Setup, On the SKW-960 Subwoofer, set, Output Level control to

First Time Setup—Continued

2	On the SKW-960 Subwoofer, set	4
Subwoofer’s	the OUTPUT LEVEL control to
	“THX POSITION.”
rear panel

3	Place the speaker setup micro-
	phone at measurement point 1
	(page 42), and connect it to the
	SETUP MIC jack.
		Auto Speaker Setup
			AUDYSSEY
		Please place microphone at center
		of listening area at ear height.
		Push Enter : Next		5
	Notes:
	• Before starting Audyssey 2EQ®
	Automatic Speaker Setup, arrange
	the room and connect the speakers as
	you would for enjoying movies.
	Changes to the room after auto setup
	requires you run the auto setup again,
	as room EQ characteristics may have
	changed.
	• When starting the automatic speaker
	setup, do not stand between the
	speakers and microphone, and avoid
	obstacles blocking the path between
	speakers and microphone. This will
	produce inaccurate results.			6
	• Position the microphone at ear height

of a seated listener with the micro- phone tip pointed directly at the ceil- ing using a tripod. Do not hold the microphone in your hand during measurements as this will produce inaccurate results.

• Make the room as quiet as possible.

Background noise can disrupt the room measurements. Close win- dows, silence cell phones, televi- sions, radios, air conditioners, fluorescent lights, home appliances, light dimmers, or other devices.

• Cell phones should be turned off or placed away from all audio electron- ics during the measurement process as Radio Frequency Interference (RFI) may cause measurement dis- ruptions (even if the cell phone is not in use).

Press [ENTER].

The automatic speaker setup starts.

Auto Speaker Setup AUDYSSEY

Do not unplug microphone.

Please keep quiet.

Now Measuring. . .

Test tones are played through each speaker as Audyssey 2EQ Automatic Speaker Setup runs. This process takes a few minutes. Please refrain from talking during measurements and do not stand between speakers and the microphone.

The following screen appears.

Auto Speaker Setup AUDYSSEY

Please place microphone at right end

of listening area at ear height.

Push Enter : Next

Move the speaker setup micro- phone to measurement point 2 (page 42), then press [ENTER].

Audyssey 2EQ performs more mea- surements. This takes a few minutes.

The following screen appears.

Auto Speaker Setup AUDYSSEY

Please place microphone at left end

of listening area at ear height.

Push Enter : Next

Move the speaker setup micro- phone to measurement point 3 (page 42), then press [ENTER].

Audyssey 2EQ performs more mea- surements. This takes a few minutes.

43