Onkyo HT-R960, SKW-960, SKF-960F, SKC-960C, SKB-960, SKM-960S Advanced Setup, Speaker Distance

Advanced Setup—Continued

8	Use the Down [ ] button to
	select “Surr Back Ch,” and use

the Left and Right []/[ ] but- tons to select 2ch or 1ch.

2ch: Select if two (left and right) surround back speakers are connected.

1ch: Select if one surround back

speaker is connected.

Note:

• If the Surround or Surr Back settings in steps 7 and 8 are set to No, this set- ting does not appear.

9	Press the [SETUP] button.
	Setup closes.

Speaker Distance

These settings are set automatically by the Automatic Speaker Setup function (see page 42).

With these settings, you can specify the distance from each speaker to the listening position.

1	Measure and make a note of the
	distance from each speaker to
	the listening position.
2	Press the [RECEIVER] REMOTE
	MODE button, followed by the
	[SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.
3	Use the Up and Down [ ]/[ ]
	buttons to select “2. Speaker

Setup,” and then press [ENTER].

4	Use the Up and Down [ ]/[ ]
	buttons to select “2. Speaker Dis-

tance,” and then press [ENTER].

5	While “Unit” is displayed, use the
	Left and Right [ ]/[ ] buttons to
	select “feet” or “meters.”

feet: Distances can be set in feet. Range: 1 to 30 feet in 1-foot steps.

meters: Distances can be set in meters. Range: 0.3 to 9 meters in 0.3-meter steps.

6	Use the Down [ ] button to
	select “Left,” and use the Left and

Right []/[ ] buttons to specify the distance for the front speak- ers, then press the Down [ ] but- ton to select the next speaker.

7	Repeat step 6 for all speakers.
	Note:
	Speakers that you set to No in the
	“Speaker Configuration” on page 81
	cannot be selected.
8	Press the [SETUP] button.
	Setup closes.

Note:

•These settings cannot be adjusted while a pair of head- phones is connected, speaker set B is on, or the multi- channel DVD input is being used.

82