BenQ MX511 user manual Description of each menu

Description of each menu

•The default values listed in this manual, especially on pages 46-54, are for reference only. They may vary between the projectors due to the continuous improvement to the products.

1. DISPLAY menu

FUNCTION	DESCRIPTION (default setting/value)
(default setting/
value)
Wall Color	Corrects the projected picture’s color when the projection surface is
	not white. See "Using Wall Color" on page 35 for details.
Aspect Ratio	There are four options to set the image's aspect ratio depending on
	your input signal source. See "Selecting the aspect ratio" on page 32 for
	details.
Keystone	Corrects any keystoning of the image. See "Magnifying and searching
	for details" on page 32 for details.
	Displays the position adjustment page. To move the projected image,
	use the directional arrow keys. The values shown on the lower position
Position	of the page change with every key press you made until they reach
	their maximum or minimum.
	This function is only available when a PC signal (analog RGB) is
	selected.
	Adjusts the clock phase to reduce image
Phase	distortion.
(depends on the
selected input
signal)	This function is only available when a PC
	signal (analog RGB) is selected.

Adjusts the horizontal width of the image.

H. Size	This function is only available when a PC signal (analog RGB) is
	selected.
Digital Zoom	Magnifies or reduces the projected image. See "Magnifying and
	searching for details" on page 32 for details.

46 Operation