BenQ MX511 Picture menu, Picture Mode, Reference, Brightness, Contrast, Color, Tint, Sharpness

2. PICTURE menu

FUNCTION	DESCRIPTION (default setting/value)
(default setting/
value)
Picture Mode	Pre-defined picture modes are provided so you can optimize your
	projector image set-up to suit your program type. See "Selecting a
	picture mode" on page 34 for details.
	Selects a picture mode that best suits your need for the image quality
Reference	and further fine-tune the image based on the selections listed on the
	same page below. See "Setting the User 1/User 2 mode" on page 34 for
Mode	details.
	This function is only available when User 1/2 is selected.
Brightness	Adjusts the brightness of the image. See "Adjusting Brightness" on
	page 35 for details.
	This function is only available when User 1/2 is selected.
Contrast	Adjusts the degree of difference between dark and light in the image.
	See"Adjusting Contrast" on page 35 for details.
	This function is only available when User 1/2 is selected.
	Adjusts the color saturation level -- the amount of each color in a
Color	video image. See "Adjusting Color" on page 35 for details.
	This function is only available when User 1/2 is selected.
	This function is only available when a Video or S-Video signal is
	selected and the system format is NTSC or PAL.
	Adjusts the red and green color tones of the image. See "Adjusting
Tint	Tint" on page 35 for details.
	This function is only available when User 1/2 is selected.
	This function is only available when a Video or S-Video signal is
	selected and the system format is NTSC or PAL..
	Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness	Sharpness" on page 35 for details.
	This function is only available when User 1/2 is selected.
	This function is only available when a Video or S-Video signal is
	selected and the system format is NTSC or PAL.

48 Operation