3.Remove the lamp cover by (a) sliding the cover toward the side of the
projector and (b) lifting it off. | (b) |
•Do not turn the power on with the lamp
cover removed. | (a) |
• Do not insert your fingers between the |
|
lamp and the projector. The sharp edges |
|
inside the projector may cause injuries. |
|
4.Loosen the screws that secure the lamp.
5.Lift the handle so that it stands up. Use the handle to slowly pull the lamp out of the projector.
•Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector.
•Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials.
•Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images.
6. Insert the new lamp into the lamp compartment and make sure it fits in the projector.
Maintenance 59