BenQ MX511 user manual Warranty and Copyright information, Limited warranty

Page 68

Warranty and Copyright information

Limited warranty

BenQ warrants this product against any defects in material and workmanship, under normal usage and storage.

Proof of purchase date will be required with any warranty claim. In the event this product is found to be defective within the warranty period, BenQ's only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects.

Important: The above warranty shall be void if the customer fails to operate the product in accordance with BenQ's written instructions, especially the ambient humidity must be in- between 10% and 90%, temperature in-between 0°C and 35°C, altitude lower than 4920 feet, and avoiding to operate the projector in a dusty environment. This warranty gives you specific legal rights, and you may have other rights which vary from country to country.

For other information, please visit www.BenQ.com.

Copyright

Copyright 2010 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.

*DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. Others are copyrights of their respective companies or organizations.

68 Warranty and Copyright information

Image 68
Contents Welcome MS510/MX511 Digital ProjectorTable of contents Important safety instructions Safety Instructions Do not block the ventilation holes Safety Instructions Projector features IntroductionShipping contents Projector exterior view Front/upper sideControls and functions ProjectorCeiling mounting the projector Remote control Up/DownTimer On Timer Setup Setting the presentation timer onPositioning your projector Choosing a locationObtaining a preferred projected image size Positioning your projector Projection dimensions Min. zoomConnection Connecting a computer or monitor Connecting a computerConnecting a monitor To connect the projector to a notebook or desktop computerConnecting Video source devices Connecting audioConnecting an Hdmi source device To connect the projector to an Hdmi source deviceConnecting a Component Video source device To connect the projector to a Component Video source deviceConnecting an S-Video/composite source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarity Correcting keystoneUsing the menus Use / to highlight the System Setup Basic menuUsing a security cable lock Utilizing the password functionSetting a password If you forget the passwordDisabling the password function Entering the password recall procedureChanging the password Operation Switching input signal Changing Color SpaceMagnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Selecting a picture mode Setting the User 1/User 2 modeGo to the Picture Picture Mode menu Optimizing the imageUsing Wall Color Fine-tuning the image quality in user modesPress Mode/Enter and the 3D Color Management page displays About color temperatures3D Color Management Creating your own startup screen Setting the presentation timer To cancel the timer, perform the following stepsPresentation Timer Top-Left Bottom-Left Top-Right Bottom-RightHiding the image How to use the Timer On key?Remote paging operations To highlight the Information menu Utilizing FAQ functionFreezing the image Adjusting the sound Adjusting the sound levelTo activate the High Altitude Mode Operating in a high altitude environmentPersonalizing the projector menu display Shutting down the projectorMenu operation Menu systemSystem Setup Basic Setup AdvancedDescription of each menu 3D Sync InvertTeaching TemplatePicture Mode Picture menuReference ModeTemperature Save SettingsInput signal Picture menu Source menuPresentation Timer Menu SettingsSystem Setup Basic menu OperationRemote ReceiverSystem Setup Advanced menu QuickCooling High AltitudeReset All ClosedCaption StandbyFAQ-Image Installation Features ServiceInformation menu CurrentMaintenance Care of the projectorSetting Lamp mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Projector and b lifting it off Resetting the lamp timer Tighten the screws that secure the lampIndicators Power Temp LampTroubleshooting Specifications OpticalDimensions Ceiling mount installationCeiling mount screws Unit mmTiming chart Supported timing for PC inputSupported timing for Hdmi input Supported timing for Component-YPbPrinput Warranty and Copyright information Limited warrantyRegulation statements FCC statementRegulation statements