Onkyo Specifications TX-NR5009, Amplifier Section Tuner Section, General, Video Section, Hdmi

Page 103

Specifications (TX-NR5009)

Amplifier Section

 

Tuner Section

Rated Output Power

All channels: (North American)

145 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.05% (FTC)

175 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (FTC)

185 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.1% (FTC)

(Others)

9 ch × 220 W at 6 ohms, 1 kHz, 1 ch driven of 1 % (IEC)

Maximum Effective Output Power

(Asian)

9 ch × 280 W at 6 ohms, 1 kHz, 1 ch driven (JEITA)

Dynamic Power*

*IEC60268-Short-term maximum output power

 

400 W (3 , Front)

 

300 W (4 , Front)

 

180 W (8 , Front)

THD+N (Total Harmonic Distortion+Noise)

 

0.05% (20 Hz - 20 kHz, half power)

Damping Factor

60 (Front, 1 kHz, 8 )

Input Sensitivity and Impedance (Unbalance)

200 mV/47 k(LINE)

2.5 mV/47 k(PHONO MM)

Rated RCA Output Level and Impedance

1 V/470 (PRE OUT)

Maximum RCA Output Level and Impedance 5.5 V/470 (PRE OUT)

Phono Overload 70 mV (MM 1 kHz 0.5%)

Frequency Response 5 Hz - 100 kHz/+1 dB, -3 dB (Direct mode)

Tone Control Characteristics

 

±10 dB, 50 Hz (BASS)

 

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

110 dB (LINE, IHF-A)

 

80 dB (PHONO MM, IHF-A)

Speaker Impedance

4 - 16

FM Tuning Frequency Range

(North American)

87.5MHz - 107.9 MHz

(Others)

87.5MHz - 108.0 MHz, RDS

AM Tuning Frequency Range

 

522/530 kHz - 1611/1710 kHz

Preset Channel

40

General

 

 

 

Power Supply

(North American)

 

AC 120 V, 60 Hz

 

(Others)

 

AC 220 - 240 V, 50/60 Hz

Power Consumption

(North American) 12.8 A

 

(Others) 1160 W

No-sound Power Consumption

(North American)

135W

(Others)

145W

Stand-by Power Consumption

 

(North American)

 

0.2 W

 

(Others)

 

0.3 W

Dimensions (W × H × D)

 

435 mm × 198.5 mm × 463.5 mm

 

17-1/8" × 7-13/16" × 18-1/4"

Weight

25.0 kg (55.1 lbs.)

HDMI

 

Input

IN 1, IN 2, IN 3, IN 4, IN 5, IN 6, IN 7,

 

AUX INPUT

Output

OUT MAIN, OUT SUB

Video Resolution

1080p

Audio Format

Dolby TrueHD, DTS-HD Master Audio,

 

DVD-Audio, DSD

Supported

3D, Audio Return Channel (OUT MAIN),

 

DeepColor, x.v.Color, LipSync,

 

CEC (RIHD)

Video Inputs

Video Section

 

Component

IN 1, IN 2, IN 3

Input Sensitivity/Output Level and Impedance

S-Video

BD/DVD, VCR/DVR, CBL/SAT, GAME

Composite

BD/DVD, VCR/DVR, CBL/SAT, GAME,

1 Vp-p/75 (Component and S-Video Y)

 

AUX

0.7 Vp-p/75 (Component PB/CB, PR/CR)

 

Analog RGB

PC IN

0.28 Vp-p/75 (S-Video C)

1 Vp-p/75 (Composite)

 

 

Component Video Frequency Response

Video Outputs

 

5 Hz - 100 MHz/+0 dB, -3 dB

 

 

 

Component

MONITOR OUT

 

S-Video

MONITOR OUT, VCR/DVR OUT

 

Composite

MONITOR OUT, VCR/DVR OUT,

 

 

ZONE2 OUT

En

103

Image 103
Contents TX-NR5009 TX-NR3009 Away from the rear panel or wall, creating a flue-like Local regulations when disposing of batteries10 cm 4 at the rear. The rear edge of the shelf or Board above the apparatus shall be set 10 cmPrecautions Transmission Supplied AccessoriesInstalling the batteries Aiming the remote controllerContents Connections FeaturesAmplifier ProcessingTHX Ultra2 Plus European and Asian models Front & Rear PanelsFront Panel North American modelsDisplay Front L/R, CENTER, Surr L/R Rear PanelZone 2 and Zone 3 12V Trigger OUT jacks Zone 2 and Zone 3 PRE/LINE OUT jacksControlling the AV Receiver Remote ControllerConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Speaker Connection Precautions Speaker ConfigurationAttaching the Speaker Cable Labels Speakers a 7.2-channel playback Speakers B Stereo playback About Speakers a and Speakers BFL Speakers B FR Channel Playback with Speakers a or Speakers B Using Dipole SpeakersSpeakers a Using Powered SubwoofersBi-amping the Front Speakers OUTSpecify None for any channel that you don’t want to output Connecting a Power AmplifierHdmi cable Connecting AV componentsAbout AV Connections AV Cables and JacksAudio Return Channel is set to Auto Connecting Components with HdmiAudio Return Channel ARC function Jack Components AssignableJack/Port Components Assignable Connecting Your ComponentsHow to record a video source Connecting a Recording Component Connecting Onkyo uComponentsNorth American models European and Asian Models Connecting the AntennasConnecting the Power Cord Plug the power cord into an AC wall outletTurning Off AV receiver enters standby modeTurning On/Off the AV Receiver Turning OnPlaying the Connected Component Selecting the Language for the Onscreen Setup MenusControlling Contents of USB or Network Devices PlaybackPlaying an iPod/iPhone via USB Understanding Icons on the DisplayEnter Listening to Internet Radio Playing a USB DeviceRegistering My Favorites*1 Listening to Other Internet RadioTop menu of Internet Radio Remote Playback Windows Media Player 11 SetupWindows Media Player 12 Setup Playing Music Files on a ServerListening to AM/FM Radio Using Remote PlaybackUsing the Tuner Tuning into Radio StationsUsing RDS excluding North American models Presetting AM/FM StationsMode Finding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP First measurement position Using Basic FunctionsUsing the Automatic Speaker Setup Measurement procedurePress Enter Disconnect the speaker setup microphone When you’ve finished making the settings, press` Cancel Use q/wto select a target, and use e/rto change the settingChanging the Speaker Setup Manually Error MessagesUsing a Powered Subwoofer Selecting Listening Modes Using the Listening ModesInput Source Following audio formats are supported by the listening modeAbout Listening Modes Explanatory NotesListening Modes Onkyo-Original DSP Listening ModesHeight Resolution AudioDolby Pro Logic Dolby Pro Logic IIzDTS NeoX *8 DTS-ES Matrix *7Audyssey DSX *9 THX Games Listening Mode Description Input Speaker Source LayoutTHX Cinema THX MusicDialogue Normalization Using the Sleep Timer Using the Home MenuChanging the Input Display Setting the Display BrightnessUsing the Whole House Mode Displaying Source InformationMuting the AV Receiver Using HeadphonesSpeakers a or Speakers B Configuration Selecting Speaker LayoutRecording Using Easy MacrosExplanatory Notes Advanced SetupOn-screen Setup Menus Common Procedures in Setup MenuMonitor Out Input/Output AssignBD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, Port Here are the default assignmentsInput selector Default assignment Hdmi InputBD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX TV/CD, PHONO, Port Component Video InputDigital Audio Input Analog Audio InputSpeaker Settings Speaker SetupSurround Back Ch FrontCenter*1, Surround*1, Surround Back*2*3*4*5 Front Wide*2*6*7*8, Front High*1*2*7Unit Subwoofer PhaseWireless Subwoofer Speaker DistanceTHX Audio Setup Equalizer SettingsLevel Calibration BGC Audio AdjustMultiplex/Mono DolbyHalf Mode DimensionDolby Volume Volume LevelerDirect Theater-DimensionalAudyssey DSX LFE LevelSound Program Edit Source SetupAudyssey Dynamic EQ Dynamic VolumeReference Level Sync IntelliVolumeName Edit Picture Adjust Block NR*3*5*6*7 Color Temperature*3*5Mosquito NR*3*5*6*7 Random NR*3*5*6*7Audio Selector Charge ModeFixed Mode Charge ModeDTS/DTS-ES/DTS-HD Listening Mode PresetVolume Setup MiscellaneousMulti Zone Hardware SetupOSD Setup Remote ID` Last Hdmi ControlRIHDHdmi Through ` Off ` AutoNetwork Auto StandbyDhcp Activities Setup Remote Controller SetupFirmware Update Remote Mode SetupSound Program Lock SetupUsing the Audio Settings Tone Control SettingsFor Dolby Digital and Dolby Digital Plus sources, Dolby Volume Late NightMusic Optimizer Late NightRe-EQTHX Re-EQScreen Centered Dialog Re-EQMaking Multi Zone Connections Connecting the Zone Speakers Directly to the AV receiverConnecting the Zone Speakers to an Additional Amplifier Multi Zone12V Trigger Out Operating on the remote controllerControlling Zone 2/3 Components Zone 2 Video OutputAdjusting the Tone and Balance of Zones Adjusting the Volume for ZonesMuting Zones Using a Multiroom Kit with a Cabinet Using a Multiroom Kit with ZoneUsing a Multiroom Kit with Other Components IPod/iPhone Playback via Onkyo Dock Using the Onkyo DockUP-A1 Dock RI Dock Controlling Your iPod/iPhoneReturn Available buttonsPlaylist e / r Muting Album +Use q/w/e/rto select a character, and then press Looking up for Remote Control CodePress Receiver followed by Setup Use q/wto select a category, and then pressEntering Remote Control Codes Controlling Other Components Remote Control Codes for Onkyo Components Connected via uResetting Remote Mode Buttons Resetting the Remote ControllerNumber +10 Components ButtonsCassettetape deck TV VOL q/wRemote Learning CommandsDeleting Acquired Commands Following buttons cannot learn new commandsDeleting Macros Using Normal MacrosMaking Macros Running MacrosPower TroubleshootingAudio About DTS signals There’s no sound with a certain signal formatCan’t select the Pure Audio listening mode Speaker volume cannot be set as requiredVideo Remote ControllerTuner Recording UP-A1 Dock for iPod/iPhoneUSB Device Playback Zone 2/3Others Music Server and Internet RadioImportant Note Regarding Video Playback Video ATTOff defaultVideo Attenuation Video ATTOn Gain is reduced by 2 dBBefore you start Firmware UpdateUpdate procedure Updating the Firmware via NetworkErrors during an update via network TroubleshootingUpdating the Firmware via USB Errors during an update via USB Video Connection Formats Connection Tips and Video Signal PathMonitor Out set to Analog Use this setting if you connect the AV receiver’sFor details, refer to Video Resolution Chart Audio Connection FormatsInput 4K *2 1080p/24 1080i 720p 480p/576p 480i/576i Video Resolution ChartOutput OutputAbout p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with Connection Operate with the remote controller How to connect and setupConfirm the connecting and setting Confirm the settingsSupported Audio Formats About HdmiAbout Copyright Protection Connecting to the Network Network/USB FeaturesNetwork Requirements Remote playback Server RequirementsUSB Device Requirements Server playbackAbout Dlna Supported Audio File FormatsVideo Section Specifications TX-NR5009Amplifier Section Tuner Section GeneralAudio Outputs Audio InputsOthers Input Sensitivity/Output Level and Impedance Specifications TX-NR3009106 107 Memo4 0 0 7 9