Onkyo TX-NR5009 Using Dipole Speakers, Channel Playback with Speakers a or Speakers B

■7.2-channel Playback with Speakers A or Speakers B

The following illustration shows how to connect the speakers for up to 7.2-channel playback with Speakers A or Speakers B. If you’re using only one surround back speaker, connect it to the SURR BACK/ZONE 3 L terminals.

Front B right Front A right Front A left Front B left Center

Surround	Front high	Surround	Surround	Front high	Surround
right	right	back right	back left	left	left

Note

•The speakers are configured by using the “Speaker Setup” setting (➔ page 51).

•You can choose which speakers you want to use with Speakers A or Speakers B (➔ page 45).

Using Dipole Speakers

You can use dipole speakers for the surround and surround back speakers. Dipole speakers output the same sound in two directions.

Dipole speakers typically have an arrow printed on them to indicate how they should be positioned. The surround dipole speakers (a) should be positioned so that their arrows point toward the TV/screen, while the surround back dipole speakers (b) should be positioned so that their arrows point toward each other, as shown.

TV/screen
a	a
b	b

En

15