Onkyo TX-NR5009 Specifications TX-NR3009, Input Sensitivity/Output Level and Impedance

Page 105

Specifications (TX-NR3009)

Amplifier Section

 

Tuner Section

Rated Output Power

All channels: (North American)

140 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.05% (FTC)

160 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (FTC)

170 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.1% (FTC)

(Others)

9 ch × 200 W at 6 ohms, 1 kHz, 1 ch driven of 1 % (IEC)

Maximum Effective Output Power

(Asian)

9 ch × 250 W at 6 ohms, 1 kHz, 1 ch driven (JEITA)

Dynamic Power*

*IEC60268-Short-term maximum output power

 

320 W (3 , Front)

 

270 W (4 , Front)

 

160 W (8 , Front)

THD+N (Total Harmonic Distortion+Noise)

 

0.05% (20 Hz - 20 kHz, half power)

Damping Factor

60 (Front, 1 kHz, 8 )

Input Sensitivity and Impedance (Unbalance)

200 mV/47 k(LINE)

2.5 mV/47 k(PHONO MM)

Rated RCA Output Level and Impedance

1 V/470 (PRE OUT)

Maximum RCA Output Level and Impedance 5.5 V/470 (PRE OUT)

Phono Overload 70 mV (MM 1 kHz 0.5%)

Frequency Response 5 Hz - 100 kHz/+1 dB, -3 dB (Direct mode)

Tone Control Characteristics

 

±10 dB, 50 Hz (BASS)

 

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

110 dB (LINE, IHF-A)

 

80 dB (PHONO MM, IHF-A)

Speaker Impedance

4 - 16

Video Section

Input Sensitivity/Output Level and Impedance

1Vp-p/75 (Component and S-Video Y) 0.7 Vp-p/75 (Component PB/CB, PR/CR) 0.28 Vp-p/75 (S-Video C)

1Vp-p/75 (Composite)

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, -3 dB

FM Tuning Frequency Range

(North American)

87.5MHz - 107.9 MHz

(Others)

87.5MHz - 108.0 MHz, RDS

AM Tuning Frequency Range

 

522/530 kHz - 1611/1710 kHz

Preset Channel

40

General

 

 

 

Power Supply

(North American)

 

AC 120 V, 60 Hz

 

(Others)

 

AC 220 - 240 V, 50/60 Hz

Power Consumption

(North American) 11.6 A

 

(Others) 1060 W

No-sound Power Consumption

155 W

Stand-by Power Consumption

(North American)

0.2W

(Others)

0.3W

Dimensions (W × H × D)

 

435 mm × 198.5 mm × 463.5 mm

 

17-1/8" × 7-13/16" × 18-1/4"

Weight

25.0 kg (55.1 lbs.)

HDMI

 

Input

IN 1, IN 2, IN 3, IN 4, IN 5, IN 6, IN 7,

 

AUX INPUT

Output

OUT MAIN, OUT SUB

Video Resolution

1080p

Audio Format

Dolby TrueHD, DTS-HD Master Audio,

 

DVD-Audio, DSD

Supported

3D, Audio Return Channel (OUT MAIN),

 

DeepColor, x.v.Color, LipSync,

 

CEC (RIHD)

Video Inputs

Component

IN 1, IN 2, IN 3

S-Video

BD/DVD, VCR/DVR, CBL/SAT, GAME

Composite

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

AUX

Analog RGB

PC IN

Video Outputs

Component

MONITOR OUT

S-Video

MONITOR OUT, VCR/DVR OUT

Composite

MONITOR OUT, VCR/DVR OUT,

 

ZONE2 OUT

Audio Inputs

 

Digital

Optical: 2 (Rear), 1(Front)

 

Coaxial: 3

Analog

BD/DVD, MULTI CH, VCR/DVR,

 

CBL/SAT, GAME, PC, TV/CD, PHONO,

 

AUX

Multichannel Inputs

7.1

 

En

105

Image 105
Contents TX-NR5009 TX-NR3009 10 cm 4 at the rear. The rear edge of the shelf or Local regulations when disposing of batteriesBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Installing the batteries Supplied AccessoriesAiming the remote controller TransmissionContents Amplifier FeaturesProcessing ConnectionsTHX Ultra2 Plus Front Panel Front & Rear PanelsNorth American models European and Asian modelsDisplay Zone 2 and Zone 3 12V Trigger OUT jacks Rear PanelZone 2 and Zone 3 PRE/LINE OUT jacks Front L/R, CENTER, Surr L/RControlling the AV Receiver Remote ControllerConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Speaker Configuration Speaker Connection PrecautionsAttaching the Speaker Cable Labels About Speakers a and Speakers B Speakers a 7.2-channel playback Speakers B Stereo playbackFL Speakers B FR Channel Playback with Speakers a or Speakers B Using Dipole SpeakersBi-amping the Front Speakers Using Powered SubwoofersOUT Speakers aSpecify None for any channel that you don’t want to output Connecting a Power AmplifierAbout AV Connections Connecting AV componentsAV Cables and Jacks Hdmi cableAudio Return Channel ARC function Connecting Components with HdmiJack Components Assignable Audio Return Channel is set to AutoJack/Port Components Assignable Connecting Your ComponentsHow to record a video source Connecting a Recording Component Connecting Onkyo uComponentsConnecting the Power Cord Connecting the AntennasPlug the power cord into an AC wall outlet North American models European and Asian ModelsTurning On/Off the AV Receiver AV receiver enters standby modeTurning On Turning OffControlling Contents of USB or Network Devices Selecting the Language for the Onscreen Setup MenusPlayback Playing the Connected ComponentUnderstanding Icons on the Display Playing an iPod/iPhone via USBEnter Listening to Internet Radio Playing a USB DeviceListening to Other Internet Radio Registering My Favorites*1Top menu of Internet Radio Windows Media Player 12 Setup Windows Media Player 11 SetupPlaying Music Files on a Server Remote PlaybackUsing the Tuner Using Remote PlaybackTuning into Radio Stations Listening to AM/FM RadioPresetting AM/FM Stations Using RDS excluding North American modelsMode Displaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Using the Automatic Speaker Setup Using Basic FunctionsMeasurement procedure First measurement position` Cancel When you’ve finished making the settings, pressUse q/wto select a target, and use e/rto change the setting Press Enter Disconnect the speaker setup microphoneError Messages Changing the Speaker Setup ManuallyUsing a Powered Subwoofer Selecting Listening Modes Using the Listening ModesAbout Listening Modes Following audio formats are supported by the listening modeExplanatory Notes Input SourceListening Modes Onkyo-Original DSP Listening ModesDolby Pro Logic Resolution AudioDolby Pro Logic IIz HeightDTS-ES Matrix *7 DTS NeoX *8Audyssey DSX *9 THX Cinema Listening Mode Description Input Speaker Source LayoutTHX Music THX GamesDialogue Normalization Using the Sleep Timer Using the Home MenuUsing the Whole House Mode Setting the Display BrightnessDisplaying Source Information Changing the Input DisplaySpeakers a or Speakers B Configuration Using HeadphonesSelecting Speaker Layout Muting the AV ReceiverRecording Using Easy MacrosOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Explanatory NotesMonitor Out Input/Output AssignInput selector Default assignment Here are the default assignmentsHdmi Input BD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, PortDigital Audio Input Component Video InputAnalog Audio Input BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX TV/CD, PHONO, PortSpeaker Settings Speaker SetupCenter*1, Surround*1, Surround Back*2*3*4*5 FrontFront Wide*2*6*7*8, Front High*1*2*7 Surround Back ChWireless Subwoofer Subwoofer PhaseSpeaker Distance UnitEqualizer Settings THX Audio SetupLevel Calibration Multiplex/Mono Audio AdjustDolby BGCDolby Volume DimensionVolume Leveler Half ModeAudyssey DSX Theater-DimensionalLFE Level DirectSource Setup Sound Program EditAudyssey Dynamic Volume Dynamic EQReference Level IntelliVolume SyncName Edit Picture Adjust Mosquito NR*3*5*6*7 Color Temperature*3*5Random NR*3*5*6*7 Block NR*3*5*6*7Fixed Mode Charge ModeCharge Mode Audio SelectorVolume Setup Listening Mode PresetMiscellaneous DTS/DTS-ES/DTS-HDOSD Setup Hardware SetupRemote ID Multi ZoneHdmi Through Hdmi ControlRIHD` Off ` Auto ` LastAuto Standby NetworkDhcp Firmware Update Remote Controller SetupRemote Mode Setup Activities SetupUsing the Audio Settings Lock SetupTone Control Settings Sound ProgramMusic Optimizer Dolby Volume Late NightLate Night For Dolby Digital and Dolby Digital Plus sources,Screen Centered Dialog Re-EQRe-EQ Re-EQTHXConnecting the Zone Speakers to an Additional Amplifier Connecting the Zone Speakers Directly to the AV receiverMulti Zone Making Multi Zone ConnectionsControlling Zone 2/3 Components Operating on the remote controllerZone 2 Video Output 12V Trigger OutAdjusting the Volume for Zones Adjusting the Tone and Balance of ZonesMuting Zones Using a Multiroom Kit with Zone Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Other Components Using the Onkyo Dock IPod/iPhone Playback via Onkyo DockUP-A1 Dock RI Dock Controlling Your iPod/iPhonePlaylist e / r Available buttonsMuting Album + ReturnPress Receiver followed by Setup Looking up for Remote Control CodeUse q/wto select a category, and then press Use q/w/e/rto select a character, and then pressEntering Remote Control Codes Resetting Remote Mode Buttons Remote Control Codes for Onkyo Components Connected via uResetting the Remote Controller Controlling Other ComponentsCassettetape deck Components ButtonsTV VOL q/w Number +10Deleting Acquired Commands Learning CommandsFollowing buttons cannot learn new commands RemoteMaking Macros Using Normal MacrosRunning Macros Deleting MacrosTroubleshooting PowerAudio Can’t select the Pure Audio listening mode There’s no sound with a certain signal formatSpeaker volume cannot be set as required About DTS signalsRemote Controller VideoTuner Recording UP-A1 Dock for iPod/iPhoneOthers Zone 2/3Music Server and Internet Radio USB Device PlaybackVideo Attenuation Video ATTOff defaultVideo ATTOn Gain is reduced by 2 dB Important Note Regarding Video PlaybackUpdate procedure Firmware UpdateUpdating the Firmware via Network Before you startTroubleshooting Errors during an update via networkUpdating the Firmware via USB Errors during an update via USB Video Connection Formats Connection Tips and Video Signal PathFor details, refer to Video Resolution Chart Use this setting if you connect the AV receiver’sAudio Connection Formats Monitor Out set to AnalogOutput Video Resolution ChartOutput Input 4K *2 1080p/24 1080i 720p 480p/576p 480i/576iUsing an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with Connection Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerAbout Hdmi Supported Audio FormatsAbout Copyright Protection Network/USB Features Connecting to the NetworkNetwork Requirements USB Device Requirements Server RequirementsServer playback Remote playbackAbout Dlna Supported Audio File FormatsAmplifier Section Tuner Section Specifications TX-NR5009General Video SectionAudio Inputs Audio OutputsOthers Input Sensitivity/Output Level and Impedance Specifications TX-NR3009106 107 Memo4 0 0 7 9