Onkyo TX-NR5009 Video Attenuation, Video ATTOff default, Video ATTOn Gain is reduced by 2 dB

Page 90

■The following settings can be made for the S-Video and composite video inputs

You must use the buttons on the unit to make these settings.

On the AV receiver, press the input selector for the input source that you want to set and the SETUP button simultaneously. While holding down the input selector button, press SETUP until “Video ATT:On” appears on the display. Then, release both buttons. To reactivate the setting, repeat the above process so that “Video ATT:Off” appears on the display, and release the buttons.

• Video Attenuation

This setting can be made for the BD/DVD, VCR/DVR, CBL/SAT, GAME or AUX input.

If you have a game console connected to the composite video input, and the picture isn’t very clear, you can attenuate the gain.

Video ATT:Off: (default).

Video ATT:On: Gain is reduced by 2 dB.

■If the picture on your TV/monitor connected to the HDMI output(s) is unstable, try switching the DeepColor function off

To turn off the DeepColor function, simultaneously press the CBL/SAT and 8ON/STANDBY buttons on the AV receiver. While holding down CBL/SAT, press 8ON/STANDBY until “Off” appears on the display. Then, release both buttons. To reactivate the DeepColor function, repeat the above process until “On” appears on the display and release the buttons.

The AV receiver contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s malfunction. Before you record important data, make sure that the material will be recorded correctly.

Before disconnecting the power cord from the wall outlet, set the AV receiver to standby.

Important Note Regarding Video Playback

The AV receiver can upconvert component video, S- Video, and composite video sources for display on a TV connected to the HDMI output(s). However, if the picture quality of the source is poor, upconversion may make the picture worse or disappear altogether.

In this case, try the following:

1 If the video source is connected to a component video input, connect your TV to the

COMPONENT VIDEO MONITOR OUT.

If the video source is connected to an S-Video input, connect your TV to a MONITOR OUT S.

If the video source is connected to a composite video input, connect your TV to the MONITOR OUT V.

2 On the main menu, select “Input/Output Assign” and then “Component Video Input” (➔ page 50).

If the video source is connected to COMPONENT VIDEO IN 1, select the relevant input selector, and assign it to “IN1”.

If the video source is connected to COMPONENT VIDEO IN 2, select the relevant input selector, and assign it to “IN2”.

If the video source is connected to COMPONENT VIDEO IN 3, select the relevant input selector, and assign it to “IN3”.

If the video source is connected to an S-Video input or composite video input, select the relevant input selector, and assign it to “- - - - -”.

Tip

•To by-pass the upconversion, set the “Picture Mode” setting to “Direct” (➔ page 61).

En

90

Page 89 Page 91
Image 90
Page 89 Page 91
Contents TX-NR5009 TX-NR3009 Board above the apparatus shall be set 10 cm Local regulations when disposing of batteries10 cm 4 at the rear. The rear edge of the shelf or Away from the rear panel or wall, creating a flue-likePrecautions Aiming the remote controller Supplied AccessoriesInstalling the batteries TransmissionContents Processing FeaturesAmplifier ConnectionsTHX Ultra2 Plus North American models Front & Rear PanelsFront Panel European and Asian modelsDisplay Zone 2 and Zone 3 PRE/LINE OUT jacks Rear PanelZone 2 and Zone 3 12V Trigger OUT jacks Front L/R, CENTER, Surr L/RRemote Controller Controlling the AV ReceiverConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Speaker Configuration Speaker Connection PrecautionsAttaching the Speaker Cable Labels About Speakers a and Speakers B Speakers a 7.2-channel playback Speakers B Stereo playbackFL Speakers B FR Using Dipole Speakers Channel Playback with Speakers a or Speakers BOUT Using Powered SubwoofersBi-amping the Front Speakers Speakers aConnecting a Power Amplifier Specify None for any channel that you don’t want to outputAV Cables and Jacks Connecting AV componentsAbout AV Connections Hdmi cableJack Components Assignable Connecting Components with HdmiAudio Return Channel ARC function Audio Return Channel is set to AutoConnecting Your Components Jack/Port Components AssignableHow to record a video source Connecting Onkyo uComponents Connecting a Recording ComponentPlug the power cord into an AC wall outlet Connecting the AntennasConnecting the Power Cord North American models European and Asian ModelsTurning On AV receiver enters standby modeTurning On/Off the AV Receiver Turning OffPlayback Selecting the Language for the Onscreen Setup MenusControlling Contents of USB or Network Devices Playing the Connected ComponentUnderstanding Icons on the Display Playing an iPod/iPhone via USBEnter Playing a USB Device Listening to Internet RadioListening to Other Internet Radio Registering My Favorites*1Top menu of Internet Radio Playing Music Files on a Server Windows Media Player 11 SetupWindows Media Player 12 Setup Remote PlaybackTuning into Radio Stations Using Remote PlaybackUsing the Tuner Listening to AM/FM RadioPresetting AM/FM Stations Using RDS excluding North American modelsMode Displaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Measurement procedure Using Basic FunctionsUsing the Automatic Speaker Setup First measurement positionUse q/wto select a target, and use e/rto change the setting When you’ve finished making the settings, press` Cancel Press Enter Disconnect the speaker setup microphoneError Messages Changing the Speaker Setup ManuallyUsing a Powered Subwoofer Using the Listening Modes Selecting Listening ModesExplanatory Notes Following audio formats are supported by the listening modeAbout Listening Modes Input SourceOnkyo-Original DSP Listening Modes Listening ModesDolby Pro Logic IIz Resolution AudioDolby Pro Logic HeightDTS-ES Matrix *7 DTS NeoX *8Audyssey DSX *9 THX Music Listening Mode Description Input Speaker Source LayoutTHX Cinema THX GamesDialogue Normalization Using the Home Menu Using the Sleep TimerDisplaying Source Information Setting the Display BrightnessUsing the Whole House Mode Changing the Input DisplaySelecting Speaker Layout Using HeadphonesSpeakers a or Speakers B Configuration Muting the AV ReceiverUsing Easy Macros RecordingCommon Procedures in Setup Menu Advanced SetupOn-screen Setup Menus Explanatory NotesInput/Output Assign Monitor OutHdmi Input Here are the default assignmentsInput selector Default assignment BD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, PortAnalog Audio Input Component Video InputDigital Audio Input BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX TV/CD, PHONO, PortSpeaker Setup Speaker SettingsFront Wide*2*6*7*8, Front High*1*2*7 FrontCenter*1, Surround*1, Surround Back*2*3*4*5 Surround Back ChSpeaker Distance Subwoofer PhaseWireless Subwoofer UnitEqualizer Settings THX Audio SetupLevel Calibration Dolby Audio AdjustMultiplex/Mono BGCVolume Leveler DimensionDolby Volume Half ModeLFE Level Theater-DimensionalAudyssey DSX DirectSource Setup Sound Program EditAudyssey Dynamic Volume Dynamic EQReference Level IntelliVolume SyncName Edit Picture Adjust Random NR*3*5*6*7 Color Temperature*3*5Mosquito NR*3*5*6*7 Block NR*3*5*6*7Charge Mode Charge ModeFixed Mode Audio SelectorMiscellaneous Listening Mode PresetVolume Setup DTS/DTS-ES/DTS-HDRemote ID Hardware SetupOSD Setup Multi Zone` Off ` Auto Hdmi ControlRIHDHdmi Through ` LastAuto Standby NetworkDhcp Remote Mode Setup Remote Controller SetupFirmware Update Activities SetupTone Control Settings Lock SetupUsing the Audio Settings Sound ProgramLate Night Dolby Volume Late NightMusic Optimizer For Dolby Digital and Dolby Digital Plus sources,Re-EQ Re-EQScreen Centered Dialog Re-EQTHXMulti Zone Connecting the Zone Speakers Directly to the AV receiverConnecting the Zone Speakers to an Additional Amplifier Making Multi Zone ConnectionsZone 2 Video Output Operating on the remote controllerControlling Zone 2/3 Components 12V Trigger OutAdjusting the Volume for Zones Adjusting the Tone and Balance of ZonesMuting Zones Using a Multiroom Kit with Zone Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Other Components Using the Onkyo Dock IPod/iPhone Playback via Onkyo DockUP-A1 Dock Controlling Your iPod/iPhone RI DockMuting Album + Available buttonsPlaylist e / r ReturnUse q/wto select a category, and then press Looking up for Remote Control CodePress Receiver followed by Setup Use q/w/e/rto select a character, and then pressEntering Remote Control Codes Resetting the Remote Controller Remote Control Codes for Onkyo Components Connected via uResetting Remote Mode Buttons Controlling Other ComponentsTV VOL q/w Components ButtonsCassettetape deck Number +10Following buttons cannot learn new commands Learning CommandsDeleting Acquired Commands RemoteRunning Macros Using Normal MacrosMaking Macros Deleting MacrosTroubleshooting PowerAudio Speaker volume cannot be set as required There’s no sound with a certain signal formatCan’t select the Pure Audio listening mode About DTS signalsRemote Controller VideoTuner UP-A1 Dock for iPod/iPhone RecordingMusic Server and Internet Radio Zone 2/3Others USB Device PlaybackVideo ATTOn Gain is reduced by 2 dB Video ATTOff defaultVideo Attenuation Important Note Regarding Video PlaybackUpdating the Firmware via Network Firmware UpdateUpdate procedure Before you startTroubleshooting Errors during an update via networkUpdating the Firmware via USB Errors during an update via USB Connection Tips and Video Signal Path Video Connection FormatsAudio Connection Formats Use this setting if you connect the AV receiver’sFor details, refer to Video Resolution Chart Monitor Out set to AnalogOutput Video Resolution ChartOutput Input 4K *2 1080p/24 1080i 720p 480p/576p 480i/576iUsing an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with Connection Confirm the settings How to connect and setupConfirm the connecting and setting Operate with the remote controllerAbout Hdmi Supported Audio FormatsAbout Copyright Protection Network/USB Features Connecting to the NetworkNetwork Requirements Server playback Server RequirementsUSB Device Requirements Remote playbackSupported Audio File Formats About DlnaGeneral Specifications TX-NR5009Amplifier Section Tuner Section Video SectionAudio Inputs Audio OutputsOthers Specifications TX-NR3009 Input Sensitivity/Output Level and Impedance106 Memo 1074 0 0 7 9
Top Page Image Contents