Chapter Three: Hardware Installation and Replacement
This chapter refers to installing or replacing options within the Clean Screen itself. Instructions on installing the Clean Screen onto a standard Planar mounting option will come with the mount- ing equipment itself.
Removing the Back Housing
Twelve T25 Torx screws
Four holes for standard
Planar mounting options (10⁄32)
Three T15 Torx screws
Figure 8
Power down unit first and disconnect it from the power source.
1.Power down unit first and disconnect it from the power source.
2.Use a
3.Place Clean Screen face down on a secure flat surface, using a cloth or other
4.Remove the twelve attachment screws from the back housing using a T25 torx driver.
5.Remove the three attachment screws from the back housing located near the connector ports using a T15 torx driver.
6.Remove the back panel itself by gently lifting the bottom back edge first.
6Planar Clean Screen PC User’s Manual