Planar C3013T, C3012T Integrated Peripherals Sub-Menu, LPT Port, LPT Mode, Diskette Controller

Page 34

Integrated Peripherals Sub-Menu

The options in this sub-menu configure the onboard serial and parallel ports and disk controllers.

h

 

h

h

h

 

h

h

h

h

 

 

 

Figure 20 — Integrated Peripherals sub-menu.

 

hh

COM A

 

 

h

 

This option configures the serial port labeled on the front panel as COM A. The choices for I/O

base addressesh

and IRQs

are: Disabledh

;

3F8H, IRQ4; 2F8H, IRQ3; 3E8H, IRQ4; 2E8H,

IRQ3; and Auto. Auto causes the System BIOS to choose a base address and IRQ setting that avoids conflicting with the other ports. The default I/O base and IRQ for this COM port is 3F8H, IRQ4.

COM B

This option configures the serial port labeled on the front panel as COM B. The choices for I/O base addresses and IRQs are: Disabled; 3F8H, IRQ4; 2F8H, IRQ3; 3E8H, IRQ4; 2E8H, IRQ3; and Auto. Auto causes the System BIOS to choose a base address and IRQ setting that avoids conflicting with the other ports. The default I/O base and IRQ for this COM port is 2F8H, IRQ3.

LPT Port

This option configures the parallel port labeled on the front panel as LPT. The choices for I/O base addresses and IRQs are: Disabled; 378H, IRQ7; 278H, IRQ5; and Auto. Auto causes the System BIOS to choose a base address and IRQ setting that avoids conflicting with the other ports. The default I/O base and IRQ for this LPT port is 378H, IRQ7.

LPT Mode

This option sets the mode under which the LPT port operates. The selections are: Output only; Bi-directional; and ECP. ECP is the default.

Diskette Controller

This option enables or disables the onboard floppy disk controller. The default is Enabled.

Chapter Five: BIOS Setup 23

Image 34
Contents User’s Manual USER’S Manual Integrated Computer with LCD Color DisplayIi Planar Clean Screen PC User’s Manual Duration of Warranty Commencement of WarrantyFederal Communications Commission FCC Requirements Installation Place of Repair or ReplacementLimitation of Warranty Technical AssistanceTable of Contents Vi Planar Clean Screen PC User’s Manual Vii Reference GuideWhat’s in this manual? Before You BeginWhat’s in the box? What if I’m missing something?Safety Instructions Clean Screen Mounts and AccessoriesFront Panel Connections BottomChapter One The Installation Express SetupClean Screen Facts Chapter Two The Clean Screen PCWelcome Connections Bottom Back Housing InsideChapter Two The Clean Screen PC Chapter Three Hardware Installation and Replacement Removing the Back HousingInstalling an ISA Adapter Card Do not remove the T-Bar or standoffsTo install a SO Dimm module Installing MemoryTo remove an SO Dimm module Replacing the Hard Disk Drive Installing the new hard diskRemoving the existing hard disk Replacing the Battery Flash memory. See Chapter Five Bios SetupReplacing the Fuses Mounting the Clean Screen Connecting Peripherals Chapter Four System SetupConnecting the Keyboard Floppy Drive ConnectorHeadphones or External Speakers Power SupplyPower Cord Selection Powering Up the Clean Screen PCDriver Overview Setup F2Push-Button Volume Control Front Panel ControlsEntering the Bios Setup Program Chapter Five Bios SetupSetup Screens Main Menu Memory Cache Sub-Menu Boot Sequence Sub-MenuKeyboard Features Sub-Menu Memory Shadow Sub-MenuBoot Sequence Boot Sequence Sub-Menu under Main MenuBoot Delay Setup PromptFloppy Check Summary ScreenAdvanced Menu Bios Extension Size Bios ExtensionsBios Extension Offset in FBD Destination AddressLPT Port LPT ModeIntegrated Peripherals Sub-Menu Diskette ControllerTouch Panel IRQ Touch Panel Base AddressLocal Bus IDE Adapter Standby Timeout Power MenuPower Savings Suspend TimeoutKeyboard Fixed Disk TimeoutStandby Timer Reset Events Standby Break EventsStandby Wakeup Events Exit Menu Clear Over Temperature Error Restore ConditionAppendix C Cleaning Tips Chapter Six Care and CleaningMaintenance Tips Approved cleaning solutions includeAppendix a Product Specifications Printer Port Thermostatic Switch/Temperature SensorExternal Serial Ports Floppy Disk Drive PortNorth America European Environmental SpecificationsDescription Pin Assigned and Available IRQs Appendix B Programming InterfaceMemory Map Range CPU address Region CachedAddress List DMAsAddress Device Troubleshooting Procedure Appendix C TroubleshootingAnti-Virus Alert Boot Failures CausesProblems At Initial System Startup Problems After the System Has Been Running CorrectlyProblems Running New Application Software Problems Operating Add-In BoardsProblems Operating Pcmcia Cards Problems and Suggestions What happens What to doOver Temperature Error and press enter Error and Information Messages Error Message / Beeps ExplanationError Message Explanation PostPCI Configuration Status and Error Messages Message ExplanationResetting the System Cmos Configuration Appendix D Touch Screen optionalFor Further Information and Driver Updates For ServiceAppendix E Technical Support Canada