JVC DLA-SH4KNL Using the Mail Delivery Feature, Enter ArootB in Login Name, Click Aloginb

Page 21

7 Enter the IP address assigned by the DHCP server in the address field of the web browser, and click AGoB

●A login screen for this projector appears.

7

Using the Mail Delivery Feature

This feature enables delivery of mail (error message) to the preset e-mail address when error occurs inside this projector unit.

Connection Example

ADSL Modem ,etc

To Internet Connection

ETHER

NOTE:

●Refer to the client settings for the DHCP server to obtain information on the IP address for this unit.

●If connection is unsuccessful, this may be due to the network environment. For details, consult your network administrator.

●If an error message appears, configure the IP address manually. (A Page 21)

8 Enter ArootB in Login Name

Input Your Login Name & Password

Login Name root

Password

LOGIN

9 Click ALOGINB

NOTE:

●You can alter the user name and password in the ANetworkB menu. Specify a user name and password of not more than eight single-byte alphanumeric characters. (A Page 31)

●If you have forgotten the password, please consult your authorized dealer.

When configuring the IP address manually or connecting this projector to the computer using a USB cable

●To configure the IP address of this projector manually, connect this projector to the computer using a USB cable to invoke the menu screen of the projector, followed by configuring the IP address.

●You need to install a driver in order to connect the projector and computer using a USB cable.

NOTE:

●For details on manual configuration of network settings and installation of the USB driver, please consult your authorized dealer.

LAN

WAN		LAN1 LAN2 LAN3 LAN4

DHCP Server

To LAN Terminal

21

Image 21

Contents For Customer use Projector DLA-SH4KINSTRUCTIONSSafety Precautions About the installation placeMachine Noise Information Germany only Do not allow any unqualified person to install the unit Safety Precautions Cont’d Power cordDo not cut off the main plug from this equipment EMC Supplement Check the Accessories/ Optional Accessories ContentsHow to Read this Manual FeaturesHigh flexible installation User-friendly interface and high operabilityMaintenance Procedures Precautions During UseBurning-in of D-ILA Device Viewing Conditions Brightness of RoomFront/Right Side Names and Functions of PartsRear Names and Functions of Parts Cont’d When using one set of projector Installation When using two sets of projectors side by side When the projector is suspendedInstallation Cont’d Projector InstallationInstalling the Projector and Screen When shift amount in the left/right direction is 0 % When shift amount in the right direction is +25 % When shift amount in the left direction is -25 % When light passes through the glass of projection boothProjecting images by arranging projectors side by side Installing the Projector and Screen Cont’dApprox .29 m Screen Size and Projection DistanceConnecting Video Signals of the Computer Connection During Single-Screen Mode Display Possible Input Signals and Projected Image Connection During Single-Screen Mode Display Connection During Two-Screen/Four Screen Mode Display Connecting Video Signals Computer Cont’dConnection Example During Two-Screen Mode Connection During Two-Screen/Four-Screen Mode DisplayConfiguring the Network Settings Connection Using a LAN CableConnection Example PC for this ProjectorUsing the Mail Delivery Feature Enter ArootB in Login NameClick Aloginb Projecting Image Useful Features During Projection Main Menu Settings MenuLatest Error Setting Value Description PowerSignal Status TemperatureImage Menu Setting Menu Cont’dSetting Menu Setting Value Description Input LevelDisplay Mode Convergence Menu Setting Value Description RedLens Menu FocusShift Option Menu Network Menu Mail Menu Error message sent from this projectorPassword Setting Value Description Mail SettingMail AddressCommunication Specifications Command FormatRS-232C Interface External control command table Parameters used for the data formatON/OFF Cleaning and Replacing the Filter MaintenanceRoutine Servicing Replacement of Light Source LampTroubleshooting When Projection has Ended Mode displayImage is Unusually darkMessage Cause Details What to do when these messages are displayedLamp Time Over Out of Range Measures when the warning mode appears IndicatorsIndicator Description Check MeasureLatest Error Specifications RS-232C Terminal Pin No Signal Operation Signal Direction Specifications Cont’dDVI-D Terminal Pin No Signal Pin Assignment Top Dimensional Outline Drawing Side Front RearOthers Page DLA-SH4K Projector Projector DLA-SH4KNLINSTRUCTIONS Safety Precautions Do not allow any unqualified person to install the unit For European continent countries AC200 V to 240 EMC Supplement Network Settings Connection and Installation Design is compact and light, and enables stacking Ultra-high resolution of 40962400 Inclined installation Low power consumptionAccessories Sold Separately AccessoriesPrecautions During Use Lens Cap included with the optional lens Projection Lens optionalLens Mounting Bracket M L When using two sets of projectors side by side When using one set of projector When the projector is suspended Optional projection lensProjector Installation Angle Installing the Projector and ScreenScreen Cont’d Installing the Projector When light passes through the glass of projection booth GL-MS4015SZG Zoom lens Installing the Projector Screen Cont’d GL-MS4011SG Short focal length lens Possible Input Signals and Projected Image Connection During Single-Screen Mode Display Channel Link Status 20481200 Connection Example During Four-Screen Mode Connection Example During Two-Screen ModeSpecifications of PC for Controlling this Projector When assigning a static IP address When assigning IP address from the Dhcp server Turning On the Main Power IP address setting at the computer IP Address SettingsAssigning a static IP address Click Aokb on the ALocal Area Connection PropertiesB screenDeselect the check Select AEnableB Assigning a static IP address Cont’d Cont’dAfter connecting, turn on the main power Set the Adhcp ClientB setting of this projector to AdhcpbAssigning IP Address from the Dhcp Server Adjust the zoom ratio screen size when zoom lens is in use Hiding the projected image temporarily Setting Menu Cont’d Enable Lamp Enable FAN Enable Projection Sets gamma to Setting Menu Convergence Menu Lens Menu Option Menu Mac Address Login Password ChangeConfirm New Error message sent from this projector Setting Value Description Mail Setting Response Data Format Projector PC Command Data Format PC Projector Parameters used for the data format External control command tableMaintenance Clean dirt on the cabinet Clean dirt on the lens Remove dirt that is attached to the vent holes Troubleshooting Immediately After power is Turned on Screen does Immediately When Projection has EndedAppear What to do when these messages are displayed STANDBY/ON Lamp Measures when the warning mode appearsLatest Error Accessories Signal System General Optical System Pin Assignment Top Side Front Rear DLA-SH4KNL Projector