JVC DLA-SH4KNL instruction manual Convergence Menu

Page 82

Operation and Settings

Setting Menu (Cont’d)

Convergence Menu

This menu is used for correcting color shifts in the optical system.

Main

Image

Setting

Convergence

Lens

Option

Network

Mail

host PJ-1 user: root

			Logout
Red		Blue
U			U
L	R	L	R
D			D

Item	Setting Value				Description

Red	—		For adjusting the horizontal/vertical position of red and blue colors on
Blue	—		the image.
	—
			NOTE:
			NOTE:
			● The green color value is fixed.
			● The outer buttons are used for adjustment in units of 1/4 pixels, and
			the inner buttons in units of 1/10 pixels.
			● When the image is flipped horizontally or vertically, the horizontal
			and vertical directions are reversed.
			● Use images with a clear outline (such as color cross hatch patterns
			available in this projector (A Page 36)) for adjustment.

			CAUTION:
			CAUTION:
			● When the movement exceeds the limit, the color of the button turns
			red.

34

Image 82

Contents Projector DLA-SH4KINSTRUCTIONS For Customer useAbout the installation place Safety PrecautionsMachine Noise Information Germany only Do not allow any unqualified person to install the unit Power cord Safety Precautions Cont’dDo not cut off the main plug from this equipment EMC Supplement Contents Check the Accessories/ Optional AccessoriesHigh flexible installation FeaturesHow to Read this Manual User-friendly interface and high operabilityBurning-in of D-ILA Device Precautions During UseMaintenance Procedures Viewing Conditions Brightness of RoomNames and Functions of Parts Front/Right SideNames and Functions of Parts Cont’d Rear When using two sets of projectors side by side Installation When using one set of projector When the projector is suspendedProjector Installation Installation Cont’dInstalling the Projector and Screen When shift amount in the left direction is -25 % When shift amount in the right direction is +25 % When shift amount in the left/right direction is 0 % When light passes through the glass of projection boothInstalling the Projector and Screen Cont’d Projecting images by arranging projectors side by sideScreen Size and Projection Distance Approx .29 mConnection During Single-Screen Mode Display Connecting Video Signals of the Computer Possible Input Signals and Projected Image Connection During Single-Screen Mode Display Connecting Video Signals Computer Cont’d Connection During Two-Screen/Four Screen Mode Display Connection During Two-Screen/Four-Screen Mode Display Connection Example During Two-Screen ModeConnection Example Connection Using a LAN CableConfiguring the Network Settings PC for this ProjectorEnter ArootB in Login Name Using the Mail Delivery FeatureClick Aloginb Projecting Image Useful Features During Projection Settings Menu Main MenuSignal Status Setting Value Description PowerLatest Error TemperatureSetting Menu Cont’d Image MenuSetting Value Description Input Level Setting MenuDisplay Mode Setting Value Description Red Convergence MenuFocus Lens MenuShift Option Menu Network Menu Error message sent from this projector Mail MenuMail Setting Value Description Mail SettingPassword AddressCommand Format Communication SpecificationsRS-232C Interface Parameters used for the data format External control command tableON/OFF Maintenance Cleaning and Replacing the FilterReplacement of Light Source Lamp Routine ServicingTroubleshooting Image is Mode displayWhen Projection has Ended Unusually darkLamp Time Over What to do when these messages are displayedMessage Cause Details Out of RangeIndicator Description Indicators Measures when the warning mode appears Check MeasureLatest Error Specifications DVI-D Terminal Pin No Signal Specifications Cont’dRS-232C Terminal Pin No Signal Operation Signal Direction Pin Assignment Side Dimensional Outline Drawing Top Front RearOthers Page DLA-SH4K Projector Projector DLA-SH4KNLINSTRUCTIONS Safety Precautions Do not allow any unqualified person to install the unit For European continent countries AC200 V to 240 EMC Supplement Connection and Installation Network Settings Inclined installation Ultra-high resolution of 40962400 Design is compact and light, and enables stacking Low power consumptionAccessories Accessories Sold SeparatelyPrecautions During Use Projection Lens optional Lens Cap included with the optional lensLens Mounting Bracket M L When the projector is suspended When using one set of projector When using two sets of projectors side by side Optional projection lensInstalling the Projector and Screen Projector Installation AngleInstalling the Projector Screen Cont’d When light passes through the glass of projection booth Installing the Projector Screen Cont’d GL-MS4015SZG Zoom lens GL-MS4011SG Short focal length lens Possible Input Signals and Projected Image Connection During Single-Screen Mode Display Channel Link Status 20481200 Connection Example During Two-Screen Mode Connection Example During Four-Screen Mode When assigning a static IP address Specifications of PC for Controlling this Projector When assigning IP address from the Dhcp server Turning On the Main Power Assigning a static IP address IP Address Settings IP address setting at the computer Click Aokb on the ALocal Area Connection PropertiesB screenDeselect the check Select AEnableB Cont’d Assigning a static IP address Cont’dSet the Adhcp ClientB setting of this projector to Adhcpb After connecting, turn on the main powerAssigning IP Address from the Dhcp Server Adjust the zoom ratio screen size when zoom lens is in use Hiding the projected image temporarily Setting Menu Cont’d Enable Lamp Enable FAN Enable Projection Sets gamma to Setting Menu Convergence Menu Lens Menu Option Menu Change Mac Address Login PasswordConfirm New Error message sent from this projector Setting Value Description Mail Setting Command Data Format PC Projector Response Data Format Projector PC External control command table Parameters used for the data formatMaintenance Clean dirt on the lens Clean dirt on the cabinet Remove dirt that is attached to the vent holes Troubleshooting Immediately When Projection has Ended Immediately After power is Turned on Screen doesAppear What to do when these messages are displayed Measures when the warning mode appears STANDBY/ON LampLatest Error General Signal System Accessories Optical System Pin Assignment Side Top Front Rear DLA-SH4KNL Projector