JVC DLA-SH4KNL instruction manual Specifications

Page 43

Specifications

 General

Power supply

AC 110 V - 120 V,

 

AC 200 V - 240 V 50/60 Hz

Power consumption

1230 W (Standby mode: 2.7 W)

Current consumption Max 10.9 A (AC 110 V - 120 V) Max 6 A (AC 200 V - 240 V)

Calorific power

4428 kJ/h (1058 kcal/h)

Air capacity

Intake: Approx. 3 m³/min

 

Discharge: Approx. 3 m³/min

Allowable operating temperature range 10 C to 35 C

Allowable operating humidity range

Less than 80 % (no condensation)

Allowable storage temperature range –5 C to 60 C

Installation height

Operation guarantee: 2000 m and

 

below

 

Performance guarantee: 1500 m

 

and below

Dimensions (WidthDepthHeight)

663mm827 mm342 - 362 mm (Excluding protrusions)

Mass

59 kg

Optical System

Projection method

D-ILA analog drive system 3

D-ILA element *1, *2

1.27" (40962400 pixels) 3 pcs

 

(total no. of pixels: 29,491,200 pixels)

Projection lens

x1.22 power zoom lens

 

(1.50:1 - 1.84:1)

Light-source Lamp

825 W xenon lamp

Screen size

80" to 300"

Projection distance

Approx. 2.5 m to 12 m

Signal System

Digital video

40962400,

Input format

40962160,

 

38402400,

 

38402160,

 

20481200,

 

20481080,

 

19201200,

 

19201080,

 

16001200,

 

12801024,

 

1024768,

 

800600,

 

640480

DVI clock

to 165 MHz (Single)

(Rx clock)

to 330 MHz (Dual)

Display resolution

40962400

Terminal

Video input

DVI-D (dual link) 24 pins

 

(supports 12-bit extended input)  4

 

(supports HDCP*3)

LAN

RJ45  1

USB

Type B (Slave)  1

RS-232C

D-sub 9 pins (male)  1

Accessories

Power cord

1

*1 D-ILA is the abbreviation for Direct drive Image Light Amplifier.

*2 D-ILA devices are manufactured using extremely high- precision technology. Pixel effectiveness is 99.99 %. Only 0.01 % or less of the pixels would either not lit up or remain permanently lit up.

*3 HDCP is the abbreviation for High-bandwidth Digital Content Protection system. Images from the DVI input terminal may not be displayed due to HDCP specification changes.

The open source software is embedded in this product. For more information, please go to: http://www.jvc-victor.co.jp/english/download/lnx/07jvc-pj/

Specifications and appearance of this product may be subject to change for improvement without prior notice.

Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension. Images may differ from the actual product.

43

Image 43
Contents For Customer use Projector DLA-SH4KINSTRUCTIONSAbout the installation place Safety PrecautionsMachine Noise Information Germany only Do not allow any unqualified person to install the unit Power cord Safety Precautions Cont’dDo not cut off the main plug from this equipment EMC Supplement Check the Accessories/ Optional Accessories ContentsUser-friendly interface and high operability FeaturesHow to Read this Manual High flexible installationViewing Conditions Brightness of Room Precautions During UseMaintenance Procedures Burning-in of D-ILA DeviceFront/Right Side Names and Functions of PartsRear Names and Functions of Parts Cont’d When the projector is suspended Installation When using one set of projector  When using two sets of projectors side by sideProjector Installation Installation Cont’dInstalling the Projector and Screen  When light passes through the glass of projection booth  When shift amount in the right direction is +25 % When shift amount in the left/right direction is 0 %  When shift amount in the left direction is -25 %Projecting images by arranging projectors side by side Installing the Projector and Screen Cont’dApprox .29 m Screen Size and Projection DistanceConnection During Single-Screen Mode Display Connecting Video Signals of the Computer Possible Input Signals and Projected Image  Connection During Single-Screen Mode Display Connection During Two-Screen/Four Screen Mode Display Connecting Video Signals Computer Cont’dConnection Example During Two-Screen Mode  Connection During Two-Screen/Four-Screen Mode DisplayPC for this Projector Connection Using a LAN CableConfiguring the Network Settings Connection ExampleEnter ArootB in Login Name Using the Mail Delivery FeatureClick Aloginb Projecting Image Useful Features During Projection Main Menu Settings MenuTemperature Setting Value Description PowerLatest Error Signal StatusImage Menu Setting Menu Cont’dSetting Value Description Input Level Setting MenuDisplay Mode Convergence Menu Setting Value Description RedFocus Lens MenuShift Option Menu Network Menu Mail Menu  Error message sent from this projectorAddress Setting Value Description Mail SettingPassword MailCommand Format Communication SpecificationsRS-232C Interface  Parameters used for the data format  External control command tableON/OFF Cleaning and Replacing the Filter MaintenanceRoutine Servicing Replacement of Light Source LampTroubleshooting Unusually dark Mode displayWhen Projection has Ended Image isOut of Range What to do when these messages are displayedMessage Cause Details Lamp Time OverCheck Measure Indicators Measures when the warning mode appears Indicator DescriptionLatest Error Specifications  Pin Assignment Specifications Cont’dRS-232C Terminal Pin No Signal Operation Signal Direction DVI-D Terminal Pin No Signal Front  Rear Dimensional Outline Drawing Top  SideOthers Page DLA-SH4K Projector Projector DLA-SH4KNLINSTRUCTIONS Safety Precautions Do not allow any unqualified person to install the unit For European continent countries AC200 V to 240 EMC Supplement Network Settings Connection and Installation Low power consumption  Ultra-high resolution of 40962400 Design is compact and light, and enables stacking  Inclined installationAccessories Sold Separately AccessoriesPrecautions During Use Projection Lens optional Lens Cap included with the optional lensLens Mounting Bracket M L Optional projection lens  When using one set of projector When using two sets of projectors side by side  When the projector is suspendedProjector Installation Angle Installing the Projector and ScreenScreen Cont’d Installing the Projector When light passes through the glass of projection booth  GL-MS4015SZG Zoom lens Installing the Projector Screen Cont’d GL-MS4011SG Short focal length lens  Possible Input Signals and Projected Image  Connection During Single-Screen Mode Display Channel Link Status 20481200  Connection Example During Four-Screen Mode  Connection Example During Two-Screen Mode When assigning a static IP address Specifications of PC for Controlling this Projector When assigning IP address from the Dhcp server Turning On the Main Power Click Aokb on the ALocal Area Connection PropertiesB screen IP Address Settings IP address setting at the computer Assigning a static IP addressDeselect the check Select AEnableB Assigning a static IP address Cont’d Cont’dSet the Adhcp ClientB setting of this projector to Adhcpb After connecting, turn on the main powerAssigning IP Address from the Dhcp Server Adjust the zoom ratio screen size when zoom lens is in use  Hiding the projected image temporarily Setting Menu Cont’d Enable Lamp Enable FAN Enable Projection Sets gamma to Setting Menu Convergence Menu Lens Menu Option Menu Change Mac Address Login PasswordConfirm New  Error message sent from this projector Setting Value Description Mail Setting  Response Data Format Projector PC  Command Data Format PC Projector Parameters used for the data format  External control command tableMaintenance  Clean dirt on the lens  Clean dirt on the cabinet Remove dirt that is attached to the vent holes Troubleshooting Immediately When Projection has Ended Immediately After power is Turned on Screen doesAppear What to do when these messages are displayed STANDBY/ON Lamp  Measures when the warning mode appearsLatest Error  Optical System  Signal System Accessories  General Pin Assignment  Side  Top Front  Rear DLA-SH4KNL Projector