JVC DLA-SH4KNL instruction manual EMC Supplement

Page 53

EMC Supplement

-This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional projector appliances and can be used in the following environments.

Controlled EMC environment (for example purpose built broadcasting or recording studio), and the rural outdoors environment (far away from railways, transmitters, overhead power lines, etc).

In order to keep the best performance and furthermore for electromagnetic compatibility we recommend to use the cables not exceeding the following length:

Cables

 

Length

Power cord

Power supply cord

3.3 m

DVI (X4) Cable

Shielded cable

5.0 m

USB Cable

Shielded cable

2.0 m

LAN Cable

Shielded cable

2.0 m

RS-232C Cable

Shielded cable

1.6 m

The inrush current of this apparatus is 9.705 amperes.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. In case where the strong electromagnetic waves or magnetism are near the signal cable, the picture will contain noise. In such cases, please keep the cable away from the sources of the disturbance.

Dear Customer,

This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.

European representative of Victor Company of Japan, Limited is: JVC Technical Services Europe GmbH

Postfach 10 05 04

61145 Friedberg Germany

5

Image 53
Contents For Customer use Projector DLA-SH4KINSTRUCTIONSMachine Noise Information Germany only Safety PrecautionsAbout the installation place Do not allow any unqualified person to install the unit Do not cut off the main plug from this equipment Safety Precautions Cont’dPower cord EMC Supplement Check the Accessories/ Optional Accessories ContentsHow to Read this Manual FeaturesHigh flexible installation User-friendly interface and high operabilityMaintenance Procedures Precautions During UseBurning-in of D-ILA Device Viewing Conditions Brightness of RoomFront/Right Side Names and Functions of PartsRear Names and Functions of Parts Cont’d When using one set of projector Installation When using two sets of projectors side by side  When the projector is suspendedInstalling the Projector and Screen Installation Cont’dProjector Installation  When shift amount in the left/right direction is 0 %  When shift amount in the right direction is +25 % When shift amount in the left direction is -25 %  When light passes through the glass of projection boothProjecting images by arranging projectors side by side Installing the Projector and Screen Cont’dApprox .29 m Screen Size and Projection Distance Possible Input Signals and Projected Image Connecting Video Signals of the ComputerConnection During Single-Screen Mode Display  Connection During Single-Screen Mode Display Connection During Two-Screen/Four Screen Mode Display Connecting Video Signals Computer Cont’dConnection Example During Two-Screen Mode  Connection During Two-Screen/Four-Screen Mode DisplayConfiguring the Network Settings Connection Using a LAN CableConnection Example PC for this ProjectorClick Aloginb Using the Mail Delivery FeatureEnter ArootB in Login Name Projecting Image Useful Features During Projection Main Menu Settings MenuLatest Error Setting Value Description PowerSignal Status TemperatureImage Menu Setting Menu Cont’dDisplay Mode Setting MenuSetting Value Description Input Level Convergence Menu Setting Value Description RedShift Lens MenuFocus Option Menu Network Menu Mail Menu  Error message sent from this projectorPassword Setting Value Description Mail SettingMail AddressRS-232C Interface Communication SpecificationsCommand Format ON/OFF  External control command table Parameters used for the data format Cleaning and Replacing the Filter MaintenanceRoutine Servicing Replacement of Light Source LampTroubleshooting When Projection has Ended Mode displayImage is Unusually darkMessage Cause Details What to do when these messages are displayedLamp Time Over Out of Range Measures when the warning mode appears IndicatorsIndicator Description Check MeasureLatest Error Specifications RS-232C Terminal Pin No Signal Operation Signal Direction Specifications Cont’dDVI-D Terminal Pin No Signal  Pin Assignment Top Dimensional Outline Drawing Side  Front  RearOthers Page DLA-SH4K Projector Projector DLA-SH4KNLINSTRUCTIONS Safety Precautions Do not allow any unqualified person to install the unit For European continent countries AC200 V to 240 EMC Supplement Network Settings Connection and Installation Design is compact and light, and enables stacking  Ultra-high resolution of 40962400 Inclined installation  Low power consumptionAccessories Sold Separately AccessoriesPrecautions During Use Lens Mounting Bracket Lens Cap included with the optional lensProjection Lens optional M L  When using two sets of projectors side by side  When using one set of projector When the projector is suspended Optional projection lensProjector Installation Angle Installing the Projector and ScreenScreen Cont’d Installing the Projector When light passes through the glass of projection booth  GL-MS4015SZG Zoom lens Installing the Projector Screen Cont’d GL-MS4011SG Short focal length lens  Possible Input Signals and Projected Image  Connection During Single-Screen Mode Display Channel Link Status 20481200  Connection Example During Four-Screen Mode  Connection Example During Two-Screen Mode When assigning IP address from the Dhcp server Specifications of PC for Controlling this Projector When assigning a static IP address Turning On the Main Power  IP address setting at the computer IP Address SettingsAssigning a static IP address Click Aokb on the ALocal Area Connection PropertiesB screenDeselect the check Select AEnableB Assigning a static IP address Cont’d Cont’dAssigning IP Address from the Dhcp Server After connecting, turn on the main powerSet the Adhcp ClientB setting of this projector to Adhcpb Adjust the zoom ratio screen size when zoom lens is in use  Hiding the projected image temporarily Setting Menu Cont’d Enable Lamp Enable FAN Enable Projection Sets gamma to Setting Menu Convergence Menu Lens Menu Option Menu Confirm New Mac Address Login PasswordChange  Error message sent from this projector Setting Value Description Mail Setting  Response Data Format Projector PC  Command Data Format PC Projector Parameters used for the data format  External control command tableMaintenance  Remove dirt that is attached to the vent holes  Clean dirt on the cabinet Clean dirt on the lens Troubleshooting Appear Immediately After power is Turned on Screen doesImmediately When Projection has Ended What to do when these messages are displayed STANDBY/ON Lamp  Measures when the warning mode appearsLatest Error  Accessories  Signal System General  Optical System Pin Assignment  Front  Rear  Top Side DLA-SH4KNL Projector