JVC DLA-SH4KNL instruction manual Setting Value Description Mail Setting

Page 87

indicates the factory default

Item

Setting Value

 

Description

 

E-Mail Setting

 

For configuring the e-mail feature.

 

E-Mail

ON

ON

: Use the mail feature.

 

 

OFF

OFF

: Do not use the mail feature.

 

 

 

 

E-Mail

For specifying the destination e-mail address.

 

Address

(Default Value: user@localhost)

NOTE:

 

 

 

 

 

 

Specify an address up to a maximum of 64 characters.

Make use of single-byte alphanumeric characters, “-”, “.”, “_”, and “@”.

SMTP Server

For specifying the address of the outgoing mail server.

Address

(Default Value: 1.1.1.1)

NOTE:

 

 

 

 

 

 

 

 

Specify an address up to a maximum of 15 characters.

 

 

Make use of numbers and “.”.

E-Mail Auth.

 

 

 

ON

ON

: Enable the e-mail authentication feature.

 

OFF

OFF

: Disable the e-mail authentication feature.

 

 

Auth. Type

PLAIN

For configuring the e-mail authentication type.

 

LOGIN

PLAIN

: Set e-mail authentication to APLAINB.

 

CRAM-MD5

 

LOGIN

: Set e-mail authentication to ALOGINB.

 

 

 

 

CRAM-MD5

: Set e-mail authentication to ACRAM-MD5B.

Auth. User

For configuring the account name during e-mail authentication.

Account

 

NOTE:

 

 

 

 

 

 

Specify an address up to a maximum of 31 characters.

Make use of single-byte alphanumeric characters and “-”.

Auth.

For configuring the password during e-mail authentication.

 

Password

 

NOTE:

 

 

 

 

 

 

 

 

Specify an address up to a maximum of 31 characters.

 

 

 

Make use of single-byte alphanumeric characters and “-”.

 

Port No.

 

 

 

25

For configuring the SMTP server port number.

 

 

465

 

 

 

 

587

 

 

 

 

 

 

 

Test Mail

When the ASENDB button is clicked, the test mail with the

 

 

 

contents configured in the E-Mail Setting will be sent.

 

39

Image 87
Contents For Customer use Projector DLA-SH4KINSTRUCTIONSSafety Precautions About the installation placeMachine Noise Information Germany only Do not allow any unqualified person to install the unit Safety Precautions Cont’d Power cordDo not cut off the main plug from this equipment EMC Supplement Check the Accessories/ Optional Accessories ContentsUser-friendly interface and high operability FeaturesHow to Read this Manual High flexible installationViewing Conditions Brightness of Room Precautions During UseMaintenance Procedures Burning-in of D-ILA DeviceFront/Right Side Names and Functions of PartsRear Names and Functions of Parts Cont’d When the projector is suspended Installation When using one set of projector  When using two sets of projectors side by sideInstallation Cont’d Projector InstallationInstalling the Projector and Screen  When light passes through the glass of projection booth  When shift amount in the right direction is +25 % When shift amount in the left/right direction is 0 %  When shift amount in the left direction is -25 %Projecting images by arranging projectors side by side Installing the Projector and Screen Cont’dApprox .29 m Screen Size and Projection DistanceConnecting Video Signals of the Computer Connection During Single-Screen Mode Display Possible Input Signals and Projected Image  Connection During Single-Screen Mode Display Connection During Two-Screen/Four Screen Mode Display Connecting Video Signals Computer Cont’dConnection Example During Two-Screen Mode  Connection During Two-Screen/Four-Screen Mode DisplayPC for this Projector Connection Using a LAN CableConfiguring the Network Settings Connection ExampleUsing the Mail Delivery Feature Enter ArootB in Login NameClick Aloginb Projecting Image Useful Features During Projection Main Menu Settings MenuTemperature Setting Value Description PowerLatest Error Signal StatusImage Menu Setting Menu Cont’dSetting Menu Setting Value Description Input LevelDisplay Mode Convergence Menu Setting Value Description RedLens Menu FocusShift Option Menu Network Menu Mail Menu  Error message sent from this projectorAddress Setting Value Description Mail SettingPassword MailCommunication Specifications Command FormatRS-232C Interface  External control command table  Parameters used for the data formatON/OFF Cleaning and Replacing the Filter MaintenanceRoutine Servicing Replacement of Light Source LampTroubleshooting Unusually dark Mode displayWhen Projection has Ended Image isOut of Range What to do when these messages are displayedMessage Cause Details Lamp Time OverCheck Measure Indicators Measures when the warning mode appears Indicator DescriptionLatest Error Specifications  Pin Assignment Specifications Cont’dRS-232C Terminal Pin No Signal Operation Signal Direction DVI-D Terminal Pin No Signal Front  Rear Dimensional Outline Drawing Top  SideOthers Page DLA-SH4K Projector Projector DLA-SH4KNLINSTRUCTIONS Safety Precautions Do not allow any unqualified person to install the unit For European continent countries AC200 V to 240 EMC Supplement Network Settings Connection and Installation Low power consumption  Ultra-high resolution of 40962400 Design is compact and light, and enables stacking  Inclined installationAccessories Sold Separately AccessoriesPrecautions During Use Lens Cap included with the optional lens Projection Lens optionalLens Mounting Bracket M L Optional projection lens  When using one set of projector When using two sets of projectors side by side  When the projector is suspendedProjector Installation Angle Installing the Projector and ScreenScreen Cont’d Installing the Projector When light passes through the glass of projection booth  GL-MS4015SZG Zoom lens Installing the Projector Screen Cont’d GL-MS4011SG Short focal length lens  Possible Input Signals and Projected Image  Connection During Single-Screen Mode Display Channel Link Status 20481200  Connection Example During Four-Screen Mode  Connection Example During Two-Screen ModeSpecifications of PC for Controlling this Projector  When assigning a static IP address When assigning IP address from the Dhcp server Turning On the Main Power Click Aokb on the ALocal Area Connection PropertiesB screen IP Address Settings IP address setting at the computer Assigning a static IP addressDeselect the check Select AEnableB Assigning a static IP address Cont’d Cont’dAfter connecting, turn on the main power Set the Adhcp ClientB setting of this projector to AdhcpbAssigning IP Address from the Dhcp Server Adjust the zoom ratio screen size when zoom lens is in use  Hiding the projected image temporarily Setting Menu Cont’d Enable Lamp Enable FAN Enable Projection Sets gamma to Setting Menu Convergence Menu Lens Menu Option Menu Mac Address Login Password ChangeConfirm New  Error message sent from this projector Setting Value Description Mail Setting  Response Data Format Projector PC  Command Data Format PC Projector Parameters used for the data format  External control command tableMaintenance  Clean dirt on the cabinet  Clean dirt on the lens Remove dirt that is attached to the vent holes Troubleshooting Immediately After power is Turned on Screen does Immediately When Projection has EndedAppear What to do when these messages are displayed STANDBY/ON Lamp  Measures when the warning mode appearsLatest Error  Optical System  Signal System Accessories  General Pin Assignment  Top  Side Front  Rear DLA-SH4KNL Projector