JVC G1000S manual Operating the Main Menu Basic Operation of the Main Menu

Operating the Main Menu (Cont.)

Operating the Main Menu (Basic Operation of the Main Menu)

■Remote control unit

MENU/ENTER button

OPERATE COMPUTER VIDEO

VOL.FOCUS

MENU/ENTER

PAGE

BACK

PRESET

Cursor buttons

QUICK	AV
ALIGN.	MUTING

PAGE BACK button

For projector’s menus, the setting menu and the main menu are available.

Here, we explain about the operation of the main menu. (see pages 34 to 47)

For the setting menu, refer to “Making Basic Settings” on page 31.

1 Press the MENU/ENTER button.

• The main menu is displayed on the screen.

2 Select an item with the cursor button

5or °.

• The selected item is shown in magenta color on the screen.

3 Set (adjust) the item.

■To select DECODER or LANGUAGE,

• Set it with the cursor button 2 or 3.

*To finish the main menu, press the PAGE BACK button.

■To select an item on the submenu,

•Press the MENU/ENTER button to display the submenu, then set (adjust) the item with the cursor buttons 2 / 3 or 5 / °.

*To return to the main menu, press PAGE BACK again. (To finish the main menu from the submenu, press PAGE BACK twice.)

■Main menu

(Example: During video signal input)

		Submenu items
Input line	Source
V I D E O	A U T O ( N T S C )

P I X E L C L O C K

P O S I T I O N

P I C T U R E

S O U N D

O P T I O N S

S O U R C E

D E C O D E R N T S C

L A N G U A G E E N G L I S H

Decoder (color system) Language

34

■About main menu display:

Input line display: The selected input-mode designation is

	displayed. For input-mode designation,
	“Y/C”, “VIDEO”, “Y, PB/B-Y, PR/R-Y”,
	“COMPUTER1” and “COMPUTER2” are
	available.
Source display: The type		of signal	being	input is
	displayed. With this projector, unique
	designations are previously given to
	specific	horizontal	and	vertical
	frequencies. This allows the source
	selected under SOURCE (submenu item)
	to be indicated. The source setting can
	be selected from AUTO mode and
	dedicated (forced) modes. When AUTO
	is selected, the horizontal and vertical
	frequencies of a signal being input are
	detected and the matched designation is
	displayed in ( ).
	Display example: “AUTO (NTSC)”
	Therefore, be careful as the source
	display does not always correspond to
	the indication or type of the input signal.
	For the unique designations for the
	specific	horizontal	and	vertical
	frequencies, see pages 19 and 46.
Submenu item display:
PIXEL CLOCK: See page 37.
POSITION	: See page 38.
PICTURE	: See pages 39 – 41.
SOUND	: See page 42.
OPTIONS	: See pages 43 – 45.
SOURCE	: See pages 46 and 47.
Decoder (Color system) display : See page 35.
Language display		: See page 36.

G1000S 34-45.EN 34 98.9.21, 9:56 AM