Sharp AR-162S operation manual Toner Save Mode, To enter the toner save mode, press the light key

Page 29

TONER SAVE MODE

This mode reduces toner consumption by approximately 10% in the automatic and manual exposure modes. Copies will be lighter but still adequate for general use. Selection of this mode does not affect the PHOTO mode. Follow the procedure below for setting the toning level.

1

2

Press the AUTO/MANUAL/PHOTO key to select the MANUAL mode.

Press and hold down the AUTO/MANUAL/PHOTO key for approximately 5 seconds.

●The MANUAL indicator will go out and the PHOTO indicator will begin to blink.

●The exposure indicator marked “5” will light up, indicating that the standard toner mode is active.

MAKING COPIES

Toner save mode

3

4

To enter the toner save mode, press the light () key.

●The exposure indicator marked “1” will light up, indicating that the toner save mode is selected.

Press the AUTO/MANUAL/PHOTO key.

●The PHOTO indicator will stop blinking and will light up steadily. The toner save mode is now active.

●To return to the standard mode, repeat the procedure but use the dark () key to select exposure level “5” in step 3.

27

Image 29

Contents AR-162S Safety Precautions Contents Conventions used in this manual IntroductionMain Features Part Names and Functions Part Names and Functions Zoom indicator p.17 Interrupt key and indicator pPaper Size indicators Alarm indicatorsPreset Ratio selector keys and indicators Start key and indicatorOriginal Size Enter key and indicators Auto Image key and indicatorDo not install your copier in areas that are Copier InstallationDo not touch the photoconductive drum green portion Push the paper tray firmly back into the copier Loading Copy PaperGently lift and pull out the paper tray until it stops Loading Copy Paper Press the Start key and then the Paper Size Enter key Auditing Accounts Enter your account number using the numeric keysWhen copying is completed, press the Audit Clear Key Normal Copying Turn the power switch onAdjust the copy density Set the number of copies using the numeric keys How to remove the platen coverNormal Copying Press the Start keyAutomatic REDUCTION/ENLARGEMENT/ZOOMPress the Auto Image key Set the number of copies Press the Start keySet the number of copies and press the Start key REDUCTION/ENLARGEMENT/ZOOMManual Unfold the bypass tray Bypass Feed special paperBypass Feed special paper TWO-SIDED Copying Press the copy ratio display key XY ZoomPress the XY-ZOOM key XY Zoom Use the Preset Ratio selector , keys and zoomPress the B/W Reverse key Check the copy paper size Reverse Press the Dual page Copy key Dual page CopyPress the Interrupt key Interrupting a Copy RUNStart key to resume copying Replace the original for the interrupted job and pressAutomatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModeRemove the new toner cartridge from the bag. Grasp Push the toner cartridge lock release lever and pullPress the light key Toner Cartridge ReplacementToner cartridge life Misfeed in the bypass tray Misfeed RemovalMisfeed in the copier First confirm the misfeed locationCarefully remove the misfed paper. Turn the roller Misfeed RemovalRotating knob in the direction of the arrow to assist Removing itMisfeed in the transport area Close the side cover by pressing the handle on Cover Misfeed in the paper trayDeveloper Required Maintenance RequiredProgram No Program name Description User ProgramsList of user programs Enter a program number using the numeric keys Setting the user programsUser Programs Program name Program NoProgram name Parameters Select the desired parameter using the numeric keysEnter a 3-digit account number using the numeric keys Settings for auditing accountsSelect the desired setting using the numeric keys Program No Account number change Press and hold down the 0 key Use the copy ratio display key to select the account NumberProgram No Resetting account Auto power shut-off mode Power Save ModesPreheat mode Copying from the preheat mode Power Save ModesSetting the power save modes Bypass tray paper feed roller User MaintenanceOriginal table and platen cover Transfer charger cleaning User MaintenanceCopier TROUBLE? Problem SolutionCopier TROUBLE? Example Self-diagnostic functionTypes and sizes of copy paper SuppliesGenuine supplies statement SuppliesProper storage Store the supplies in a location that isSpecifications Specifications Optional Equipment Part Names SpecificationsSingle Pass Feeder AR-SP2 Equipmentoptional Misfeed removal Single Pass Feeder AR-SP2Index Index Material Safety Data Sheet Special Fire Fighting Procedure Ignition TemperatureFlash Point Method Used Flammable LimitsOther Limits Ingredients CAS No ProportionRoutes of Entry Skin? Ingestion?None required under normal use Memo Memo Page Sharp Corporation

Related manuals

Manual 68 pages 6.94 Kb