Sharp AR-162S Settings for auditing accounts, Select the desired setting using the numeric keys

Page 40

USER PROGRAMS

Settings for auditing accounts

Setting of user programs No. 10 to 15 varies with the program number. For settings of all programs, first follow steps 1 to 3 in “Setting the user programs” on page 36 to select a program. (1. Press the light () key for more than 5 seconds. 2. Enter a program number (10 to 15) using the numeric keys. 3. Press the START key.) Then follow the appropriate instructions for the program.

GENERAL INFORMATION

User programs

Program No. 10: Auditing mode

If the auditing mode is enabled, copying is limited to operators with an assigned 3-digit account number. A maximum of 20, 3-digit account numbers can be assigned. Use program No. 11 to register account numbers.

When program No. 10 is entered, the current setting (0: OFF, 1:ON) will blink on the right side of the copy quantity display.

1.Select the desired setting using the numeric keys.

0: OFF

1:ON

2.Press the START key.

● The setting will be stored.

3. To continue with other user programs, press the key and enter another program number. To exit the user program mode, press the light () key.

Program No. 11: Account number entry

Program No. 11 is used to register accounts. When program No. 11 is entered, “–––” will blink in the copy quantity display.

●If the number of accounts has reached the upper limit (20), “11E” will

appear in the copy quantity display. Press the key. The copier will return to step 2 on page 36.

1.Enter a 3-digit account number using the numeric keys.

● Any 3-digit number except “000” can be registered as an account number.

2.Press the START key.

● If a number that is already registered or “000” is entered, the number will blink in the copy quantity display.

3. Repeat steps 1 and 2 for other account numbers.

4.To continue with other user programs, press the key and enter another program number. To exit the user program mode, press the light () key.

38

Image 40

Contents AR-162S Safety Precautions Contents Introduction Conventions used in this manualMain Features Part Names and Functions Part Names and Functions Interrupt key and indicator p Zoom indicator p.17Paper Size indicators Alarm indicatorsStart key and indicator Preset Ratio selector keys and indicatorsOriginal Size Enter key and indicators Auto Image key and indicatorCopier Installation Do not install your copier in areas that areDo not touch the photoconductive drum green portion Gently lift and pull out the paper tray until it stops Loading Copy PaperPush the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size Enter key When copying is completed, press the Audit Clear Key Enter your account number using the numeric keysAuditing Accounts Adjust the copy density Turn the power switch onNormal Copying How to remove the platen cover Set the number of copies using the numeric keysNormal Copying Press the Start keyREDUCTION/ENLARGEMENT/ZOOM AutomaticPress the Auto Image key Set the number of copies Press the Start keyManual REDUCTION/ENLARGEMENT/ZOOMSet the number of copies and press the Start key Bypass Feed special paper Unfold the bypass trayBypass Feed special paper TWO-SIDED Copying Press the XY-ZOOM key XY ZoomPress the copy ratio display key Use the Preset Ratio selector , keys and zoom XY ZoomReverse Press the B/W Reverse key Check the copy paper sizeDual page Copy Press the Dual page Copy keyInterrupting a Copy RUN Press the Interrupt keyStart key to resume copying Replace the original for the interrupted job and pressAutomatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light keyPush the toner cartridge lock release lever and pull Remove the new toner cartridge from the bag. GraspToner cartridge life Toner Cartridge ReplacementPress the light key Misfeed Removal Misfeed in the bypass trayMisfeed in the copier First confirm the misfeed locationMisfeed Removal Carefully remove the misfed paper. Turn the rollerRotating knob in the direction of the arrow to assist Removing itMisfeed in the transport area Misfeed in the paper tray Close the side cover by pressing the handle on CoverMaintenance Required Developer RequiredList of user programs User ProgramsProgram No Program name Description Setting the user programs Enter a program number using the numeric keysUser Programs Program name Program NoSelect the desired parameter using the numeric keys Program name ParametersSelect the desired setting using the numeric keys Settings for auditing accountsEnter a 3-digit account number using the numeric keys Program No Account number change Use the copy ratio display key to select the account Number Press and hold down the 0 keyProgram No Resetting account Preheat mode Power Save ModesAuto power shut-off mode Setting the power save modes Power Save ModesCopying from the preheat mode Original table and platen cover User MaintenanceBypass tray paper feed roller User Maintenance Transfer charger cleaningProblem Solution Copier TROUBLE?Copier TROUBLE? Self-diagnostic function ExampleSupplies Types and sizes of copy paperSupplies Genuine supplies statementProper storage Store the supplies in a location that isSpecifications Specifications Optional Equipment Single Pass Feeder AR-SP2 SpecificationsPart Names Equipmentoptional Single Pass Feeder AR-SP2 Misfeed removalIndex Index Material Safety Data Sheet Ignition Temperature Special Fire Fighting ProcedureFlash Point Method Used Flammable LimitsIngredients CAS No Proportion Other LimitsRoutes of Entry Skin? Ingestion?None required under normal use Memo Memo Page Sharp Corporation

Related manuals

Manual 68 pages 6.94 Kb