Sharp AR-162S Select the desired parameter using the numeric keys, Program name Parameters

Page 39

USER PROGRAMS

4	Select the desired parameter using the numeric keys.
	● The entered parameter number will blink on the right side of the copy

quantity display.

● The parameters are shown in the table below.

For example, to change the setting of the auto power shut-off timer to 60 min., press key 2.

Program name	Parameters
Auto clear time	0	OFF	1	30 sec.	* 2	60 sec.	3	90 sec.	4	120 sec.
	5	10 sec.

Preheat mode	0	OFF	1	30 sec.	2	60 sec.	* 3	90 sec.	4	120 sec.

Auto power shut-off timer	* 1	30 min.	2	60 min.	3	90 min.	4	120 min.	5	240 min.

Stream feeding mode	* 0	OFF	1	ON

Auto power shut-off setting	0	OFF	* 1	ON

Factory default settings are indicated with an asterisk (*).

If you select “0” (OFF) in a program, the corresponding function will be disabled.

Press the START key.

5 ● The right-hand number in the copy quantity display will be steadily lit and the entered value will be stored.

GENERAL INFORMATION

User programs

To continue with other user programs, press the key

6 and then repeat steps 2 to 5. To exit the user program mode, press the light () key.

●All the alarm indicators will go out.

37

Image 39

Contents AR-162S Safety Precautions Contents Conventions used in this manual IntroductionMain Features Part Names and Functions Part Names and Functions Alarm indicators Interrupt key and indicator pZoom indicator p.17 Paper Size indicatorsAuto Image key and indicator Start key and indicatorPreset Ratio selector keys and indicators Original Size Enter key and indicatorsDo not install your copier in areas that are Copier InstallationDo not touch the photoconductive drum green portion Loading Copy Paper Gently lift and pull out the paper tray until it stopsPush the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size Enter key Enter your account number using the numeric keys When copying is completed, press the Audit Clear KeyAuditing Accounts Turn the power switch on Adjust the copy densityNormal Copying Press the Start key How to remove the platen coverSet the number of copies using the numeric keys Normal CopyingSet the number of copies Press the Start key REDUCTION/ENLARGEMENT/ZOOMAutomatic Press the Auto Image keyREDUCTION/ENLARGEMENT/ZOOM ManualSet the number of copies and press the Start key Unfold the bypass tray Bypass Feed special paperBypass Feed special paper TWO-SIDED Copying XY Zoom Press the XY-ZOOM keyPress the copy ratio display key XY Zoom Use the Preset Ratio selector , keys and zoomPress the B/W Reverse key Check the copy paper size ReversePress the Dual page Copy key Dual page CopyReplace the original for the interrupted job and press Interrupting a Copy RUNPress the Interrupt key Start key to resume copyingAutomatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModeRemove the new toner cartridge from the bag. Grasp Push the toner cartridge lock release lever and pullToner Cartridge Replacement Toner cartridge lifePress the light key First confirm the misfeed location Misfeed RemovalMisfeed in the bypass tray Misfeed in the copierRemoving it Misfeed RemovalCarefully remove the misfed paper. Turn the roller Rotating knob in the direction of the arrow to assistMisfeed in the transport area Close the side cover by pressing the handle on Cover Misfeed in the paper trayDeveloper Required Maintenance RequiredUser Programs List of user programsProgram No Program name Description Program name Program No Setting the user programsEnter a program number using the numeric keys User ProgramsProgram name Parameters Select the desired parameter using the numeric keysSettings for auditing accounts Select the desired setting using the numeric keysEnter a 3-digit account number using the numeric keys Program No Account number change Press and hold down the 0 key Use the copy ratio display key to select the account NumberProgram No Resetting account Power Save Modes Preheat modeAuto power shut-off mode Power Save Modes Setting the power save modesCopying from the preheat mode User Maintenance Original table and platen coverBypass tray paper feed roller Transfer charger cleaning User MaintenanceCopier TROUBLE? Problem SolutionCopier TROUBLE? Example Self-diagnostic functionTypes and sizes of copy paper SuppliesStore the supplies in a location that is SuppliesGenuine supplies statement Proper storageSpecifications Specifications Optional Equipment Specifications Single Pass Feeder AR-SP2Part Names Equipmentoptional Misfeed removal Single Pass Feeder AR-SP2Index Index Material Safety Data Sheet Flammable Limits Ignition TemperatureSpecial Fire Fighting Procedure Flash Point Method UsedSkin? Ingestion? Ingredients CAS No ProportionOther Limits Routes of EntryNone required under normal use Memo Memo Page Sharp Corporation

Related manuals

Manual 68 pages 6.94 Kb