Sharp AR-162S operation manual User Programs, Setting the user programs, Program name Program No

Page 38

USER PROGRAMS

Setting the user programs

Press and hold the light () key for more than 5

1 seconds until all the alarm indicators ( , , , ,

and ) blink and “– –” appears in the copy quantity display.

GENERAL INFORMATION

2

For operation of these programs after step 3, see page 38.

Enter a program number using the numeric keys.

●The selected program number will blink in the copy quantity display.

●If a mistake is made in steps 2 to 4, press the CLEAR () key. The copier will return to step 2.

●The program numbers are shown in the table below.

For example, to change the setting of the auto power shut-off timer, press key 3.

Program name	Program No.

Auto clear time	1

Preheat mode	2

Auto power shut-off timer	3

Stream feeding mode	4

Auto power shut-off setting	5

Auditing mode	10

Account number entry	11

Account number change	12

Account number deletion	13

Number of copies per account	14

Resetting account	15

User programs

Press the START key.

3 ● For programs 1 to 5, the entered program number will be steadily lit on the left side of the copy quantity display and the currently selected parameter number for the program will blink on the right side.

●For programs 10 to 15 (programs for auditing accounts), the display varies with the program number. See page 38 for setting programs 10 to 15.

36

Image 38

Contents AR-162S Safety Precautions Contents Introduction Conventions used in this manualMain Features Part Names and Functions Part Names and Functions Paper Size indicators Interrupt key and indicator pZoom indicator p.17 Alarm indicatorsOriginal Size Enter key and indicators Start key and indicatorPreset Ratio selector keys and indicators Auto Image key and indicatorCopier Installation Do not install your copier in areas that areDo not touch the photoconductive drum green portion Push the paper tray firmly back into the copier Loading Copy PaperGently lift and pull out the paper tray until it stops Loading Copy Paper Press the Start key and then the Paper Size Enter key Auditing Accounts Enter your account number using the numeric keysWhen copying is completed, press the Audit Clear Key Normal Copying Turn the power switch onAdjust the copy density Normal Copying How to remove the platen coverSet the number of copies using the numeric keys Press the Start keyPress the Auto Image key REDUCTION/ENLARGEMENT/ZOOMAutomatic Set the number of copies Press the Start keySet the number of copies and press the Start key REDUCTION/ENLARGEMENT/ZOOMManual Bypass Feed special paper Unfold the bypass trayBypass Feed special paper TWO-SIDED Copying Press the copy ratio display key XY ZoomPress the XY-ZOOM key Use the Preset Ratio selector , keys and zoom XY ZoomReverse Press the B/W Reverse key Check the copy paper sizeDual page Copy Press the Dual page Copy keyStart key to resume copying Interrupting a Copy RUNPress the Interrupt key Replace the original for the interrupted job and pressAutomatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light keyPush the toner cartridge lock release lever and pull Remove the new toner cartridge from the bag. GraspPress the light key Toner Cartridge ReplacementToner cartridge life Misfeed in the copier Misfeed RemovalMisfeed in the bypass tray First confirm the misfeed locationRotating knob in the direction of the arrow to assist Misfeed RemovalCarefully remove the misfed paper. Turn the roller Removing itMisfeed in the transport area Misfeed in the paper tray Close the side cover by pressing the handle on CoverMaintenance Required Developer RequiredProgram No Program name Description User ProgramsList of user programs User Programs Setting the user programsEnter a program number using the numeric keys Program name Program NoSelect the desired parameter using the numeric keys Program name ParametersEnter a 3-digit account number using the numeric keys Settings for auditing accountsSelect the desired setting using the numeric keys Program No Account number change Use the copy ratio display key to select the account Number Press and hold down the 0 keyProgram No Resetting account Auto power shut-off mode Power Save ModesPreheat mode Copying from the preheat mode Power Save ModesSetting the power save modes Bypass tray paper feed roller User MaintenanceOriginal table and platen cover User Maintenance Transfer charger cleaningProblem Solution Copier TROUBLE?Copier TROUBLE? Self-diagnostic function ExampleSupplies Types and sizes of copy paperProper storage SuppliesGenuine supplies statement Store the supplies in a location that isSpecifications Specifications Optional Equipment Part Names SpecificationsSingle Pass Feeder AR-SP2 Equipmentoptional Single Pass Feeder AR-SP2 Misfeed removalIndex Index Material Safety Data Sheet Flash Point Method Used Ignition TemperatureSpecial Fire Fighting Procedure Flammable LimitsRoutes of Entry Ingredients CAS No ProportionOther Limits Skin? Ingestion?None required under normal use Memo Memo Page Sharp Corporation

Related manuals

Manual 68 pages 6.94 Kb