GENERAL INFORMATION
User programs
USER PROGRAMS
Program No. 14: Number of copies per account
Program No. 14 is used to display the total number of copies made against each account number. When program No. 14 is entered, an account number will appear in the copy quantity display.
●If no account number has been registered, “14E” will appear in the copy quantity display. Press the 
key. The copier will return to step 2 on page 36.
1.Use the copy ratio display (
) key to select the account
number.
● Use the 
key to advance through the account numbers.
2. Press and hold down the 0 key.
● The number of copies made against the specified account number will be displayed. The two higher digits and the three lower digits will appear alternately while the 0 key is pressed.
Example: 1,234 copies
● The upper limit for the number of copies is 49,999. If the number of copies made reaches 50,000, the number will be reset to 0 and counting will start again from 0.
3.Repeat steps 1 and 2 for other account numbers.
4.To continue with other user programs, press the 
key and select another program number. To exit the user program mode, press the light (
) key.
40