Sharp AR-M230, M270 manual Points to note about the Print Hold function, Printing begins

2

ADVANCED PRINTING (WINDOWS)

Printing using the print hold function (part 3)

5	Touch the [PRINT AND DELETE THE DATA] key or				6	Printing begins.
	the [PRINT AND SAVE THE DATA] key.					If another print job is already in progress, the job is stored.
				To delete the job after printing,		The job will be printed when all previous jobs are finished.
				touch the [PRINT AND DELETE
		product_information.pdf	CANCEL	THEDATA]key.Toretainthejob,
		PRINT AND DELETE THE DATA		touch the [PRINT AND SAVE
		PRINT AND SAVE THE DATA	DELETE
				THE DATA] key.

Note

To delete a job without printing it, touch the [DELETE] key.

Points to note about the Print Hold function

●The print hold function can only be used when ROPM is enabled.

●If a Notice page is printed or an error appears in the print job complete screen when you execute printing at your computer, there are already 100 print hold jobs or the machine's memory is full. Delete any unnecessary print hold jobs and then try printing again. ☞How to print a print hold job

●The amount of memory allocated to the print hold function can be changed in the key operator programs. (See "MEMORY FOR PRINTER" in the key operator's guide.)

If memory full errors frequently occur, it is recommended that additional memory be installed in the machine.

●Turning off the machine's power switch will erase the print hold jobs stored in the machine.

CONTENTS I N D E X 23