Sharp 350M, 4500 Replacing the verification stamp cartridge, Touch the Stamp key, Begin scanning

Page 14

SENDING AN IMAGE

STAMPING SCANNED ORIGINALS (VERIFICATION STAMP FUNCTION)

If the optional verification stamp unit has been installed on the scanner unit, you can have a pink fluorescent "" mark stamped on the edge of each original that is scanned using the auto document feeder.

This feature does not operate for originals scanned on the document glass.

NOTE

When both sides of an original are scanned, only the front side of the original is stamped.

Paper feed direction

A pink fluorescent "" mark is stamped on scanned originals.

1 In scanner mode, load the original and set any needed scanning conditions such as the

4 Touch the OK key.

original size, resolution, and exposure.

Stamping position

OK

L

ED

You will return to the initial screen.

T

STAMP

2 Touch the ORIGINAL key.

5 Make sure that the verification stamp icon appears to the right of the ORIGINAL key.

STANDARD

RESOLUTION

AUTO 81/2 X11

ORIGINAL

STANDARD

RESOLUTION

AUTO 81/2 X11

ORIGINAL

When this icon appears, the edge of each original will be stamped as it is scanned.

If you have selected two- sided scanning, the verification stamp icon will appear to the right of the two-sided scanning icon.

3 Touch the STAMP key.

OK

L

ED

The STAMP key is only displayed if the verification stamp unit has been installed.

When touched, the key is

6 Begin scanning.

The verification stamp function automatically turns off when all originals have been scanned.

Note that the function will also automatically turn off if you take no action for one minute after turning on the function.

T

STAMP

highlighted.

NOTES

•If an error occurs during scanning, scanning is canceled and the original is ejected. In this case, the original may be stamped without having been scanned.

•You can use the key operator program to permanently turn on the verification stamp function. (Refer to page 26.)

■ Replacing the verification stamp cartridge

Finger hold

The optional verification stamp unit contains a consumable verification stamp cartridge (ink cartridge). This cartridge (AR- SV1) must be replaced when the mark stamped on each original becomes faint. Follow the steps below to replace the cartridge.

1 Remove the stamp cover, and then grasp the finger hold on the ink cartridge and pull the cartridge out of the unit.

2 Insert the new cartridge into the unit. Replace the stamp cover.

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Laser Printer Page Table of Contents IntroductionWeb Setting PasswordsAbout the WEB Network Scanning Setting screen Basic Settings for Network ScanningMail Server and DNS Server Settings Selecting an e-mail subject only used for Scan to E-mailStoring destinations for Scan to FTP Setting UP Destination InformationStoring destinations for Scan to E-mail and Internet-Fax Storing destinations for Scan to DesktopFull Name, Display Name Storing Sender InformationStoring a Custom Directory Initial, Custom DirectoryCondition setting screen Address directory screen alphabetically ordered Sending AN Image Basic Transmission MethodTouch the Address Directory key Using the document glass 11Press the Start keyUsing the auto document feeder 11Press the Start key 10Touch the one-touch key for the desired destinationTouch the File Format key Select the file type and the compression modeTouch the outer OK key Touch the Address Review key and check the destinationsScanning and Transmitting a TWO-SIDED Original Begin scanning Replacing the verification stamp cartridgeTouch the Stamp key Finger holdTouch the Manual key Scanning SettingsManually Setting the Scanning Size Touch the desired original size keyResolution settings Selecting the ResolutionChange the resolution Touch the Resolution keyChange the exposure Exposure settingsSelecting the Exposure Touch the Exposure keyPress the JOB Status key Touch the E-MAIL/FTP key Canceling AN E-MAIL/FTP TransmissionPrioritytransmission of a Stored JOB Touch the Priority keySTORING, EDITING, and Clearing from the Touch Panel 12Touch the OK key 13Touch the Address key 10Touch the Index key11Touch an index key Check the key nameIf you cannot edit or delete a one-touch key Editing and Deleting ONE-TOUCH KeysTouch the YES key Programming a Group KEY Check the name of the key refer to onIf you cannot edit or delete a group key Editing and Deleting Group KeysTouch the YES key Touch the RE.ADDRESS key Editing and Deleting Sender InformationTouch the Store key Edit or clear the senderEnter a maximum of 6 characters for the index name Storing a Group IndexPrinting Programmed Information Touch the List Print keyError Code Table TroubleshootingIf a Transmission Error Occurs Error Code Description of the ErrorScan to E-mail initial status settings Using the KEY Operator ProgramsImage send settings Operation settings KEY Operator ProgramsSetting Programs Initial file format setting Printing OUT SettingsDefault sender set Compression mode at broadcastingSpecifications Page Sharp Corporation

350LP, 3551, 4551, 450LP, 3500 specifications

The Sharp 4500, 450M, 3551, 350M, and 3500 are part of Sharp’s versatile lineup of multifunctional printers and copiers, renowned for their robust performance and innovative technology. These models cater to various business needs, providing high-quality printing, scanning, copying, and faxing capabilities.

The Sharp 4500 stands out with its impressive speed of up to 45 pages per minute, making it ideal for busy office environments. This device supports high-resolution printing of 1200 x 1200 dpi, ensuring crisp and clear text as well as vibrant graphics. It features advanced connectivity options, including wireless, USB, and network printing capabilities, allowing easy integration into any business workflow. The intuitive touch-screen interface simplifies operation, enabling users to quickly access a variety of functions.

Moving on to the Sharp 450M, this model combines efficiency with sustainable practices. It incorporates eco-friendly technologies such as low energy consumption and duplex printing, which reduces paper waste. The 450M also features a high-capacity toner option, minimizing the frequency of cartridge changes and lowering operational costs. Additionally, it offers mobile printing solutions compatible with various devices, enhancing workplace productivity.

The Sharp 3551 and 350M models are designed to cater to medium-volume office environments. The 3551 operates at a speed of 35 pages per minute and includes features like a standard document feeder and advanced security options, ensuring the protection of sensitive information. The user-friendly interface and customizable workflow settings allow for easy operation.

On the other hand, the Sharp 3500 and 350M models focus on compact design without compromising functionality. They deliver efficient performance with print speeds of up to 35 pages per minute, catering to small and medium-sized enterprises. Both models support various print media, enabling users to handle diverse printing tasks seamlessly.

Overall, the Sharp 4500, 450M, 3551, 350M, 3500, and related multifunction printers embody Sharp's commitment to quality, efficiency, and innovation. With advanced features, robust technology, and user-friendly interfaces, these models are designed to meet the evolving needs of modern businesses, enhancing productivity while reducing environmental impact.
Top Page Image Contents