3 If you are loading A4 size paper, place the paper roll shims on each side of the paper compartment.
•The ribbed side of the shims should face inwards (toward each other).
Loading the Thermal Paper
Installation1.
4 Unwrap the roll of thermal paper and insert the paper shaft.
5 Place the roll of thermal paper in the
compartment, making sure the ends YES NO! of the rod fit into the notches on each
side of the compartment.
♦Important: The roll must be placed so that the leading edge of the paper unrolls as shown. (The paper is only coated on one side for printing. If the roll is placed backwards, the paper will come out blank after printing.)
21