Sharp F0-50 F0-70 Dialling and transmission problems, Correct socket. See Connecting the handset

Page 92

Problems and Solutions

Dialling and transmission problems

Problem		Solution

No dial tone when you	•	Make sure the handset cord is connected to the
pick up the handset.		correct socket. See Connecting the handset in
		Connections in Chapter 1.

Dialling is not possible.	•	Make sure the power cord is properly plugged into
		a power outlet.
	•	Make sure that the telephone line is properly
		connected to both the TEL. LINE socket and the
		wall socket.
	•	Make sure that the fax machine is set to the correct
		dialling mode for your telephone line. See
		Connecting the telephone line cord in
		Connnections in Chapter 1.

The power is on, but no	•	Make sure that the receiving machine has paper.
transmission takes place.
	•	Make sure that the telephone line cord is plugged
		into the TEL. LINE socket, and not the TEL. SET
		socket.
	•	If the receiving machine is in manual mode with no
		attendant, reception will not be possible.
	•	Check the display for error messages.
	•	Pick up the handset and check for a dial tone.

Nothing is printed at the	•	Make sure that the document for transmission is
receiving end.		placed face down in the feeder.

A distorted image is	•	Noise on the telephone line may cause distortion.
received at the other end.		Try sending the document again.
	•	Make a copy of the document on your fax machine.
		If the copy is also distorted, your fax machine may
		need service.

10. Trouble- shooting

91

Image 92

Contents FO-50 FO-70 Storing and Clearing Auto Dial Numbers Entering Your Name and Number Setting the Date and TimeQuick Reference Guide Sending Faxes Receiving FaxesIntroduction DisplayCompression scheme Important safety information Page Page Important Notice For New Zealand Users Table of Contents Answering Machine Connection Installation Unpacking ChecklistLook at the Operation Panel RESOLUTION/RECEPTION Mode key Speed Dial keyRedial key Start keyAbout condensation Points to keep in mind when setting upConnections Connecting the Handset Removing the packing paper For FO-50 Remove the packing paperConnecting the power cord Moving your fax and reconnectingConnecting the telephone line cord Press these keysAttaching the original document support Extension phone optionalLoading the Thermal Paper Installation1 FO-50 FO-70 Handling thermal paper Replacing the thermal paperFO-20PRw Thermal Paper 30 m roll Entering Your Name and Fax Number Press the # key twice Display will show Example Sharp = 77777 444 22 Date & Time SET Setting the Date and Time Enter the year four digits Press the Start key to start Clock Setting the Reception Mode TEL/FAX modePicking up the fax machine’s handset ModeSetting the reception mode ResolutionVolume Adjustment SpeakerRinger Silent ring fax detection systemSize and weight Sending DocumentsTransmittable Documents Loading one page at a timeOther restrictions Loading the Document Removing a document from the feeder Remove the document Contrast settings Adjusting the Resolution and ContrastResolution settings Press the Resolution Reception Mode key one or List, the contrast setting Dark will AppearSending a Fax by Normal Dialing DesiredUsing the Redial key BeepSending a Fax by Automatic Dialling Speed Dial keyStoring fax and telephone numbers for Automatic Dialling Press the Start key Chain Dialling for area and access codes Clearing auto-dial numbersMaking changes Rapid Key Dialling Speed Dialling Direct Keypad Dialling Searching for an auto-dial number Automatic redialling Transaction Report Press a number from 1 to 4 to select Condition for printingExplanation of headings SENDER/ ReceiverUsing TEL/FAX Mode Receiving DocumentsUsing FAX Mode Changing the number of rings Using TEL Reception Mode Answering with the fax’s handsetAnswering with an extension phone Comments Changing the number for remote fax activationFax Signal Receive Making Copies Rapid Key Dialling Press Making Telephone CallsNormal Dialling Enter the full Chain Dialling RedialHold Connecting an Answering Machine Answering Machine ConnectionChanging the outgoing message Activating the answering machine connectionHow the connection operates Optional A.M. Mode Settings Quiet Detect TimeQuiet Detect TM Fax when Answering machine Fails Quiet Detect Start Time Caller ID Requires Subscription to Service Special FunctionsPress 1 to turn on Caller ID, or 2 to Turn it off How Caller ID operates Display messagesViewing the Caller ID list To delete calls from the Caller ID list Priority CallBlocking voice calls Distinctive Ring Requires Subscription to Service Press 1 to turn on Distinctive Ring, or To turn it off Blocking Reception of Unwanted Faxes Return to to enter or clear Polling Requesting a Fax Transmission Requesting transmission Printing Lists Telephone Number List Anti Junk Number List Maintenance Cleaning the scanning glass and rollersCleaning the housing Line error TroubleshootingProblems and Solutions Dialling and transmission problems Correct socket. See Connecting the handsetReception and copying problems See Distinctive Ringing in ChapterAnswering machine connection General problems Transmittable Documents in ChapterMessages and Signals For display messages related to Caller IDAudible signals OUT of PaperClearing Paper Jams Clearing a jammed documentClearing jammed paper FO-50 FO-70 Index 100101 Sharp Corporation of NEW Zealand Limited