Connecting an Answering Machine
2 Set your answering machine to auto answer.
♦Your answering machine must be set to answer on a maximum of two rings. If not, you may not be able to receive faxes sent by auto- matic dialling.
♦If your answering machine has a toll saver function, make sure that it will answer by the fourth ring.
Note: If your answering machine has a remote retrieval function, make sure the code used to activate remote retrieval is different from the code used to activate fax reception with an extension telephone (see Chapter 3, Receiving Documents). If they are the same, entering the code from an outside telephone to retrieve messages will cause the fax machine to be activated.
How the connection operates
While you are out, all of your incoming calls will be answered by your answering machine and its outgoing message will play. Voice callers can leave a message. During this time, your fax will quietly monitor the line. If your fax detects a fax tone or a duration of silence greater than four seconds, it will take over the line and begin reception.
When you return and turn off your answering machine, be sure to change the reception mode back to FAX/TEL, FAX, or TEL!
6..Answering Machine
69