Sending a Fax by Automatic Dialling
Searching for an auto-dial number
If you don’t remember the Rapid Key or Speed Dial number in which you have programmed a particular fax number, you can search for the number by following the steps below. Once you have found the number, you can dial and transmit the loaded document by simply pressing the START key.
1 Load the document(s).
The display will show:
READY TO SEND
• Set the resolution and/or contrast if desired.
RESOLUTION/
RECEPTION MODE
2
Press the HOLD/SEARCH key and | HOLD/ |
|
then the 1 key. | SEARCH | 1 |
|
3
Enter the first letter of the stored name by pressing the appropriate number key (the key below the marked letter) one or more times until the letter appears in the display. If the name begins with a special character or number, press 1.
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
♦If you don’t remember the first letter, go to Step 4 (you will scroll through the list from the beginning).
♦If a name wasn’t stored for the number, press 0. This will cause numbers, not names, to appear when you scroll.
52