Sharp AR-M200 Changing a Trays Paper Size Setting, Select the tray, and then press the OK

CHANGING A TRAY'S PAPER SIZE SETTING

Follow these steps to change a tray's paper size setting.

Note	• The paper size setting cannot be changed when the machine has
	stopped temporarily due to running out of paper or a misfeed.

•During printing (even in copy mode), the paper size setting cannot be changed.

1

2

Press the [MENU] key.
Press the [	] key (	) or [	] key (	) until "PAPER SIZE"
						2
appears, and then press the [OK] key.
Press the [	] key (	) or [	] key (	) to	PAPER SIZE
select the tray, and then press the [OK]					1:TRAY1
key.					OK

1,2,3,	ZOOM
SP. FUNC
1,2,3,

3 Press the [] key () or [] key () to select the paper size, and then press the [OK] key.

The paper size changes as follows each time the [] key () or [] key () is pressed: "A4"→"B5"→"A5"→"8.5x14"→"8.5x13"→"8.5x11" →"5.5x8.5".

TRAY1

1:A4

	OK
1,2,3,	ZOOM
SP. FUNC
1,2,3,

Note	When you have finished configuring the tray's paper size setting,
	press the [MENU] key.

4 Squeeze the lock lever of the front guide and slide the front guide to match the width of the paper, and move the left guide to the appropriate slot as marked on the tray.

Left	Front
guide	guide

•The front guide is a slide-type guide. Grasp the locking knob on the guide and slide the guide to the indicator line of the paper to be loaded.

•The left guide is an insert-type guide. Remove it and then insert it at the indicator line of the paper to be loaded.

19