Sharp AR-M200 operation manual Using the Rspf, Place the originals in the RSPF. p.21

CONVENIENT COPY FUNCTIONS

Using the RSPF

1

Place the original(s) in the RSPF. (p.21)

If you place an odd number of originals for one-sided to two-sided copying, the last page will be one-sided.

2

Press the [2-SIDED COPY ()] key*1 and select the two-sided copy mode that you wish to use.

The mode changes as follows each time you press

the [2-SIDED COPY ()] key*1: "1 TO 1", "1 TO 2", "2 TO 2", "2 TO 1"

2-SIDED COPY
2 TO 1
	OK
1,2,3,	ZOOM
SP. FUNC
1,2,3,

•"1 TO 2"*2: Two-sided copies from one-sided originals

•"2 TO 2"*2: Two-sided copies from two-sided originals

•"2 TO 1": One-sided copies from two-sided originals

*When the RSPF is installed.

*1 On the AR-M200, press the [2-SIDED SCAN] key. *2 AR-M201 only

3 Press the [OK] key.

If you selected "1 TO 2" in step 2, select "LONG EDGE" or "SHORT EDGE" and press the [OK] key. LONG EDGE and SHORT EDGE are shown in the illustration on page 26.

4 If you selected "2 TO 1" or "2 TO 2", press the [] key () or [] key () to select the original size and then press the [OK] key.

The following original sizes can be selected: "A4", "B5", "A5", "8.5x14", "8.5x13", "8.5x11", "5.5x8.5".

ORIG. SIZE ENTER

A5

	OK
1,2,3,	ZOOM
SP. FUNC
1,2,3,

5 Select the number of copies and any other settings, and then press the [START] key ( ).

The copy will be delivered to the paper output tray.

To cancel automatic two-sided copying, press the [CLEAR ALL] key

Note () or press the [2-SIDED COPY ( )] key, select the "1 TO 1", and then press the [OK] key.

28