Sharp AR-M200 operation manual Reduction/Enlargement/Zoom, Press the Zoom key and/or key or key to

REDUCTION/ENLARGEMENT/ZOOM

Copies can be reduced down to 25% or enlarged up to 400%. (When the RSPF is being used, the zoom copy ratio range is 50% to 200%.) The [ZOOM] key can be pressed to quickly select a ratio from among eight preset ratios. In addition, the [ ] key () and [] key () can be pressed to select the ratio in increments of 1%.

1

2

Check the original and paper size, and place the original(s).

Press the [ZOOM] key.	COPY RATIO
	-	100%	+
			OK
	1,2,3,		ZOOM
	SP. FUNC
	1,2,3,

		3
3	Press the [ZOOM] key and/or [ ] key ( ) or [ ] key ( ) to
	select the desired copy ratio and then press the [OK] key.

Selecting a preset ratio					A4 TO B5
The preset ratios change as follows each time the
					-	86%	+
[ZOOM] key is pressed:
"100%" → "86%" → "70%" → "50%" → "25%" →							OK
"400%"	→	"200%"	→	"141%"	1,2,3,		ZOOM
					SP. FUNC
					1,2,3,

Fine adjustment of the ratio

The ratio can be adjusted from 25% to 400% in increments of 1%.

Use the [] key () or the [] key () for fine adjustment.

ZOOM

-99% +

	OK
1,2,3,	ZOOM
SP. FUNC
1,2,3,

• To return the ratio to 100%, press the [ZOOM] key until 100%

Note appears.

•Press the [ZOOM] key to set the approximate ratio, then press the [] key () or [] key ().

•To decrease or increase the zoom ratio rapidly, hold down the [] key () or [] key ().

The ratio will stop changing at each of the preset ratios. To continue changing the ratio, release the key and then hold it down again.

4 Select the number of copies and any other copy settings, and then press the [START] key ( ).

The copy will be delivered to the paper output tray.

25